Source for Lunette

[TexasTJ]

I need a Lunette for an M416 trailer. I'm changing out the surge break that came on my M416a1 and need a little help sourcing a Lunette. Any leads on one maybe used?

Thanks

Nate

 

[frenchlayer]

I got mine on ebay

 

[Mark Harley]

https://www.mullinsjeepparts.com/in...id=10&vmcchk=1&option=com_virtuemart&Itemid=2

 

[TexasTJ]

Thanks Mark. That's about the best price Ive seen.

 

[Mark Harley]

For all that expense, I think I would get some steel and fab my own.
The nose V is an easy build with four pieces of 3/16 or 1/4 steel plate.
drill the mounting holes and add a 2" receiver for a coupler mount.
a trailer jack on the side and you are good to go.

 

[TexasTJ]

Yeah I I just wanted to try to keep the Fabing down. Also I like the Landing leg and the original look. I would rebuild the surge brake on the trailer, but at some point in it life it was cracked and then not welded back together straight. You are however right I maybe better off just building something.

Nate

 

[Matt]

Too bad you're so far away. I have the entire front frame section with the lunette, landing leg that Im going to list on Craigslist today along with the stock tires/wheels and fenders.

I bought 2x3x.120 tubing and a receiver tube to build a new frame section for half of what that lunette costs. But I totaly understand wanting to keep it all original!!