Teck
New member
Hello everyone, lurked for a little while, figured I might as well put something up.
I will start with a little back story.
bought it in April 2k10
Unbearably stock
Manual trans, manual Tcase. IMO best combination
I cannot leave well enough alone, just like to make my vehicles mine.
Started with a 2" body lift, and some 31 inch Goodyear duratracs( first tires I have ever bought new). and removed the lower plastic valance
My favorate time of the year
Since I had planned on adding AUX lighting, i had a friend send me some extra switches for my light switch pannel. Used GM factory switches to try and keep it as factory looking as I could.
Before
After
Converted my Dash and 4WD indicator lights to LED's
Started a custom bumper for the front, still in very slow progress
More snow( same winter as the previous pics, it was a disappointing winter for my first year in Colorado.
For my birthday gift to myself, new wheels and the Blazer tire carrier is slightly visible.
Made a setup to haul the bikes, but have since tossed it aside.
Had to wire my garage for my welder ( took a year to catch up to me)
I will start with a little back story.
bought it in April 2k10
Unbearably stock

Manual trans, manual Tcase. IMO best combination

I cannot leave well enough alone, just like to make my vehicles mine.
Started with a 2" body lift, and some 31 inch Goodyear duratracs( first tires I have ever bought new). and removed the lower plastic valance

My favorate time of the year

Since I had planned on adding AUX lighting, i had a friend send me some extra switches for my light switch pannel. Used GM factory switches to try and keep it as factory looking as I could.
Before

After

Converted my Dash and 4WD indicator lights to LED's


Started a custom bumper for the front, still in very slow progress


More snow( same winter as the previous pics, it was a disappointing winter for my first year in Colorado.

For my birthday gift to myself, new wheels and the Blazer tire carrier is slightly visible.

Made a setup to haul the bikes, but have since tossed it aside.

Had to wire my garage for my welder ( took a year to catch up to me)

Last edited: