Tire Repair Kit in action

1leglance

2007 Expedition Trophy Champion, Overland Certifie
ARB style Tire Repair Kit

Getting a puncture in your tire immediately brings to mind using a jack, lug nuts and quite a bit of effort. But what about using a tire repair kit and saving time & effort and saving your spare in case of total tire destruction? We had just such a moment on the Continental Divide Expedition and thus an excellent chance to review an ARB style Tire Repair kit like you can get from our trusted gear guys Sierra Expeditions .

This is not meant to be a step by step guide but instead to be a review of how this $40 investment can be used by both the able bodied and disabled alike. Also regardless of your physical ability to use a piece of gear it is important to have the proper knowledge so that you can help others with trail repairs.

kit1.jpg


The first impression is that the carrying case is a bit large but when you see how well it keeps the parts arranged and the sharp bits away from the rest of your gear it isn't so bad after all. Not to mention it has little weight so little impact on your total payload.

Now it is time to play, and as you can see we need to get the cause of our puncture out of the tire, it started as a fishing weight we were thinking. This is the only thing we couldn't use the kit for, but my trusty Leatherman Wave did the trick right way. And Mike got a cool rear view mirror hanger out of his tire damage.

stucksinker.jpg


Next we need to move the steel cords inside the tire out of the way, the handle for this is easy to grip with one hand, large enough to get leverage on and a quality tool.

reamer.jpg


After that you need to place one of the plugs into a different tool and then putting some lube on it. Here is where working with 1 hand could be an issue, not impossible but would require some practice before leaving home.

patchlube.jpg


Also it is important to note that while insertion of the plug can be done with one hand the final step of pulling the tool handle up while holding onto the part that keeps the plug in place is not a one handed job. But if you have a prosthetic that can keep pressure in place you might just be able to make it happen.

insertpatch.jpg


Now it should be noted that you can use more than 1 plug in a puncture but please use your common sense, if you can stick your arm through the hole or it is more of a tear then just go ahead and use your spare.

afterrepair.jpg


You will notice that I only referred to arm mobility issues, that is because this kit would be easy to use for someone with lower mobility issues or in a wheelchair. Actually it would be easier to use this kit that change a tire for someone with lower mobility issues. All in all I think it would be a shame to not have this kit in your rig and the $40 would be small change compared to the hassle of getting a puncture in your spare not long after you change to it and still ending up stranded.
 

Lynn

Expedition Leader
I've used the cheap off-brand plug kits available at parts stores and 'big box stores,' and I think the case itself (for the one you show) is worth the money. If you just throw all the components in a tool box the plugs work to clean up all the grime in the toolbox, then adhere themselves to the bottom.








Not that I would be so careless ;)
 

paulj

Expedition Leader
I keep this kit in the compact spare compartment of my Element (along with other emergency gear). A cargo/sleeping platform covers a full size spare while still allowing access to this gear compartment.

Last year on a forest road in eastern Oregon I picked up a broken rat tail file (chainsaw sharpening tool?). Because of the position of the tire when I stopped, I was able to install the plug as illustrated while the tire was still on the car (though raised on the jack). In retrospect I should have removed the tire before trying to install the plug, since I had to push quite hard to get the plug in. Off the car I could have positioned the hole in a more convenient direction. It might also have been safer.

In any case, the kit saved me the effort of digging out the full size spare. Plus I didn't have to go to a shop to have the flat fixed, and then switch tires again.

I kept a close watch on tire pressure for the next day and camped near town (La Pine) just in case I needed to stop by a tire shop. But once the air temperature stabilized the pressure held. A year later the plug still holds.
 

Maximus Ram

Expedition Leader
Lynn said:
I've used the cheap off-brand plug kits available at parts stores and 'big box stores,' and I think the case itself (for the one you show) is worth the money. If you just throw all the components in a tool box the plugs work to clean up all the grime in the toolbox, then adhere themselves to the bottom.

I agree with that......I have the mix and match set up and if all was in one case , it would store so much easier.


Great write up :clapsmile
 

crawler#976

Expedition Leader
We've used over 30 plugs in the sidewall of a Super Swamper SX to get a rig off a trail - not something I'd recommend for highway driving, but it was better than changing a tire in that particular location. Once off the trail, we aired up the tire to 20 PSI, and it spit the plugs out, so we brought the trailer to the rig. The lesson learned was that if you need more than one plug to seal the hole, it's more than workable at low pressure. I've used 3 plugs in the tread of an MT/R and never had a problem with the tire afterward.

Mark
 

absolute

Adventurer
This ARB Tire repair kit is an excellent trail tool. The blow molded case is superior and the quality of tools is built for strength. In compared to "box store" kits, it is like lifting the rear of your vehicle with 2x4's.

I keep it all in my aluminum box that I transfer between the Silverado and Jeep!

I have used various kits through the years and still have one in the e-kit for the camper. I would definitely purchase this again.


Excellent overview!


Nick
 

Lynn

Expedition Leader
Those 'T' handles would be a big advantage over the straight handles in my cheapo kit, as well.
 

rusty_tlc

Explorer
I've had good luck with Monkey grip. The tool looks similar to that in the ARB but with a plastic Tee handle. It came with a blow mold case but I don't use that. Instead I keep the tools, patches, etc. in an ammo box with the regulator hose and accesories for my CO2 set up. The logic being if I have a hole I'll need that stuff anyway and I had empty space in the box that wanted filling up. The patches and plugs are in a small box to keep them clean.

BTW I've used the valve core replacment stuff I had a schrader valve stick one time while I was airing down, the spring failed.

I recently added a couple of valve stems to the kit. When I have time I'll add one of the tools used to install valve stems. The way I drive it wouldn't be suprising if I scrub off a valve stem one day.
 

rickc

Adventurer
The ARB tools are plated to make them smoother and easier to use. This kit is one of the cheapest ARB products you can buy.

A comment on repair: Only use the gnarly rasp if the nail/whatever is significant in size as the rasp does a lot of damage to the wires. If the nail/whatever is small the rasp is not required; just fit a plug on the tool, lube it up and push it in at the same angle that the nail came out. Never use the rasp on a sidewall puncture.
 

madizell

Explorer
For that matter you should not use a plug on a sidewall in anything other than complete desperation. Sidewall repairs are difficult at best, and usually condemn a tire to spare status.
 

rusty_tlc

Explorer
madizell said:
For that matter you should not use a plug on a sidewall in anything other than complete desperation. Sidewall repairs are difficult at best, and usually condemn a tire to spare status.
I've never heard of a tire shop that would repair a sidewall puncture. So you really have nothing to lose by plugging it, you will be replacing the tire anyway.

The alternative to plugging is breaking the bead, dismounting the tire and applying an internal patch. The re-setting the tire and seating the bead. Not impossiable to do on the trail, but not a task to be undertaken lightly.
 

rickc

Adventurer
madizell's right. Sidewall holes can quickly propagate so repairs are only an emergency measure.
 

Paul R

Adventurer
Great write up Lance, I just went and picked up a kit from cruiseroutfit tonight, here's hoping I don't need to use it! :safari-rig:
 

Forum statistics

Threads
189,085
Messages
2,912,808
Members
231,682
Latest member
YaRiteZ71
Top