Toyota Contractors Canopy & sleeping platform -W.WA

irish_11

Explorer
Forsale is my Six-pac contractors canopy. This fits standard 6ft Toyota beds from 89-04 (and maybe older). I bought it used a few months ago for a four wheel camper build and have decided to go a different route. All the doors work, all the locks are keyed a like (I have 1 key). The interior is carpeted to reduce moisture, and is great for storing tools. There are a few dents in the canopy all left by the previous owner. The canopy seals up well, could use a new seal around the door since it is starting to show its age a little. Comes with aluminum contractors rack and wired set up back up lights. I also have clamps to attach it to a bed. This canopy is light, very solid and priced very fairly considering the $1200 initial retail. $375 obo.

The sleeping platform is made to fold and slide in and out through my canopy door. It is made out of 1/2" CDX and stained to resist moisture. It has piano hinges down the sides to fold up allowing access to gear/tools/whatever. There is a hatch in the front section (closest to the cab) that removes allowing access to a compartment. $25obo or FREE if you buy the canopy.


Located in the Seattle area.


P4281354.jpg


P4281353.jpg


180194_716109449020_25914463_39953412_7328805_n.jpg


185007_716109394130_25914463_39953410_7343817_n.jpg


185052_716109354210_25914463_39953409_6226565_n.jpg
 
Last edited:

dyogim

Explorer
Can you provide dimensions overall and between where the tailgate normally sits. I'm trying to see if this would fit a 1get tundra.

Thanks!
 

irish_11

Explorer
The canopy is 74.25" long by 60.5" wide. There is a 3" lip on either side to form the seal with the top of the bed rail.

The rear door section (where the tailgate would be) is 54.25" wide by 18" tall.
 

Forum statistics

Threads
189,884
Messages
2,921,860
Members
233,084
Latest member
Off Road Vagabond
Top