Utility Bed (Northern CA) $225

[Shasta FJ]

Stahl brand utility bed. Previously mounted on a short bed Chevy full size pickup. Had plans to make an adventure trailer with roof top tent, but ended up finding a good deal on an off road tent trailer instead.

Unit has ports on both sides for dual fuel tank set up which could be handy for installation of aux fuel or water tanks. There are three compartments on each side, lockable and yes I have keys. The compartments are in excellent condition. One of the doors will need a little TLC/adjustment to close tightly. The bed floor is steel diamond plate, appears to be 3/16. Has rust and needs replacement. One of the cross members should be replaced as well. Easy fix if you're handy. I've already cut several welds when I started working on it. When finished, this would be nice to put an axle under it to match the lug pattern on your rig and have lockable, watertight storage for your gear.

$225.00. Advertised locally here in the Redding (Shasta County) area.

Have access to a tractor with forks to load. Delivery possible/negotiable as I go to Sacto on occasion.

Contact me via PM or at jondeeregn@aol.com for questions.

Ron

 

[Shasta FJ]

bump

 

[ToolBox Guy]

Interested.

Payment options?

 

[Shasta FJ]

What are your thoughts on that? I'm thinking cash at the time of the transaction which would be face to face.

Ron

 

[ToolBox Guy]

What are your thoughts on that? I'm thinking cash at the time of the transaction which would be face to face.

Ron

I'm great with cash, problem is that I am at least 8 hours from you, and not sure when I could get up there to pick up. I was thinking Paypal, then around mid-Feb. come pick it up.

You would have your money, then I would just have to trust you not to sell it to someone else.

 

[Shasta FJ]

Okay, I see now what you mean. I'd have no problem holding it for you, so you could just send up a check. I would know in the interim that it cleared before you actually picked up. I have some more pictures if you are serious that I can email. Send me an email to JonDeereGn@aol.com if you want.

Ron

 

[ToolBox Guy]

Okay, I see now what you mean. I'd have no problem holding it for you, so you could just send up a check. I would know in the interim that it cleared before you actually picked up. I have some more pictures if you are serious that I can email. Send me an email to JonDeereGn@aol.com if you want.

Ron

I will, thank you.

 

[Shasta FJ]

ttt

 

[ramsport59]

I'd pay ya double for this if you were on the east coast! these are very hard to come by in the short bed model.

Wanna ship it?

Rick