WTB: transit bag/cover for Norcold MRFT40 or older ARB/Engel fridge

[Chris21700]

Just wondering if someone might have one of these sitting around collecting dust in the garage. I don't expect it to be in mint condition, as I imagine it's been around for a while, but at least functional. My fridge is the the same as the older ARB/Engel fridges of the same capacity, so one of those covers would work as well. I need the one that has the zipper around the edge of the fridge lid, if that helps. A picture of the fridge and dimensions can be seen here:

http://www.thetford.com/HOME/Products/NorcoldRefrigeratorsHome/MRFT40/tabid/200/Default.aspx

Please PM me if you might be able to help out, I'm happy to pay a reasonable price and shipping costs.

Thanks!!

 

[Chris21700]

bump

 

[Chris21700]

bump

 

[Chris21700]

bump

 

[Chris21700]

Bump

 

[Montana Cruiser]

Hey there! I am in the market for one as well and found this;

http://www.xpeditionready.com/index...ssories/engel/engel-transit-bag-for-mt45.html

I have not ordered yet as I have a few other things to source first. I don't know the company, but it might be worth a shot, let me know if it works out. Hope that helps.

Cheers - Nate

 

[Chris21700]

Thanks for the link Nate. I've found them online new as well, just didn't want to pay the new price. I was thinking somewhere around the $50 range...hopefully. If not I'll just go without, as I have during the four years I've owned the fridge.

 

[Montana Cruiser]

I hear ya, there has to be a few used ones around gathering dust in someones garage, if you find two let me know

Cheers - Nate

 

[Chris21700]

Will do!

 

[Camelfilter]

Could also make one from Reflectix. I did for my dometic and works very well (reduced cycle time->lower power draw->better temp stabilization).

Doesn't look the best, so I may look into wrapping the outside of the Reflectix with some fabric I already have. I was thinking to keep it simple and use some 3m spray adhesive.

You can get all kinds of fabrics at a Joanne Fabric store relatively cheap, if you have one nearby. Perhaps at Michaels as well (I think they changed names...).

 

[oldskewlsk8ter]

I've been watching ebay for a while and finally picked one up for $90. Might wanna keep an eye on there.

 

[Chris21700]

Could also make one from Reflectix. I did for my dometic and works very well (reduced cycle time->lower power draw->better temp stabilization).

Doesn't look the best, so I may look into wrapping the outside of the Reflectix with some fabric I already have. I was thinking to keep it simple and use some 3m spray adhesive.

You can get all kinds of fabrics at a Joanne Fabric store relatively cheap, if you have one nearby. Perhaps at Michaels as well (I think they changed names...).

Thanks, I've read about Reflectix on here, I might end up going that route at some point.

I've been watching ebay for a while and finally picked one up for $90. Might wanna keep an eye on there.

Not bad, every time I've looked on there it's only new ones listed for sale. I'll have to make an effort to look more often I guess.