XJ owner favor

[irish_11]

I need a favor from an XJ owner. I have been looking for an ARB for my 70-series Land Cruiser and I read somewhere that an XJ bumper (I believe around 99) was a close fit. Can someone give me some measurements? I am looking for a stock or ARB bumper's overall length, and the frame distance between the posts. Thanks!

EDIT: ARB for an XJ is 62" wide at the front, 67" at the rear (it flares). About 59" between the bull bar uprights. 33" between the frame rails.

 

[Winterhawk]

I need a favor from an XJ owner. I have been looking for an ARB for my 70-series Land Cruiser and I read somewhere that an XJ bumper (I believe around 99) was a close fit. Can someone give me some measurements? I am looking for a stock or ARB bumper's overall length, and the frame distance between the posts. Thanks!

I'll do my best to get that for you tomorrow. I believe you may be correct about that. I do know that there was a slight difference between 84 to 96 and 97 and up ARB XJ bumpers, but not between the frame rails, just in the fender area. I'm looking for an ARB for my 96 XJ so if you find more than one let me know. I'm only a ferry ride away from you.

 

[Winterhawk]

Just measured and the stock bumper brackets measure 32 3/4" and they mount to the outside of the frame. The dimension to clear the fenders is 60 1/2" and tapers out to 61 1/2". Dimensions were taken off a stock '96 bumper. Hope this helps, let me know if you need more dimensions.

 

[Rachel15]

Must say Winterhawk you are a really helpful person. I like the way you do this. Hopefully, irish_11 will find it helpful in the way he wants.