xskydivingdudex's Build Thread

[xskydivingdudex]

Well its been a while and figured id start my build and show yall wat ive been up to...

Engine/Performance
- "O" Ring Gasket -
- ISR Mod -
- Extended Rear Diff Breather -
- ARB Safari Snorkel -
- 231mm Tundra Calipers -
- Brembo Rotors -

Suspension/Body
- 2" 4crawler Body Lift -

Front:
- OME 882 -
- OME N91CS -
Rear:
- 9 Wrap LC Coils -
- LC Shocks -

Tires/Wheels
- FZJ80 Rims -
- Flat Black Center Caps and Rims -
- 315/75 Kelly Safari TSR -
- All-Pro 1.25" Wheel Spacers -

Lighting
- G3 Bi-Xenon HID Projectors -
- 6000k Bulbs and White Halo -
- DDM Tuning 35w Raptor Ballast -
- Sylvania Silverstars (Roofrack Lights) -
- 20 LED Dome/Map Lights -
- Xenon License Plate Lights -
- Hella 500FF Lights (HID Retrofit) -
- PIAA 520 Lights -
- Pilot Back-Up Lights -
- Disabled DRL -
- Independent Fog Light Mod -
- Red Gauges/Center Console -

Exterior
- Tacoma ARB Deluxe Bull Bar -
- Tail Light Guards -
- 20% Tint on All Windows -
- TRD Decals -
- Tacoma Whip Mod -
- Mud Flap Mod -
- Rola Vortex Roof Rack -
- Rola Vortex Roof Rack Extensions -
- Limb Risers -
- Gobi Driver's Mount Ladder -
- Bed Lined lower Portion -
- Trail Gear Rock Sliders w/o Kickout -
- Black Emblems -

Interior
- Pioneer Avic-D3 with Navigation -
- Bluetooth Adapter with Mic -
- Full Control Ipod Cable -
- Dual Signal Antenna Integration -
- Kicker kx750.1 Amp -
- 2 12" FI X-Series Subs In Ported Box -
- Bel Vector 995 Radar -
- Garmin Nuvi 200w Navigation -
- Custom Navigation Visor -
- Tripp Lite 375w Power Inverter -
- Custom Rotary Back-Up Camera Switch -
- UltraGauge OBD Scan Tool -
- Custom Low Profile Cargo Box -

Communication
- Cobra 19 DX IV CB Radio -
- 6"x8" Pyle 50w PA Speaker -
- 3' Firestik with Heavy Spring -

Recovery/Safety
- Tow Straps -
- 2" Hitch with Ball -
- Jumper Cables -
- Bungee Cords -
- Rola Stretch Net -
- LED Maglite -
- Smittybilt D-Ring Shackles -
- 48" Hi-Lift Jack -

Security
- Viper 5901 w/Remote Start -
- Passive Arm w/lock -
- White LED Strobes -

These are the most current pics, the tires and rims were just added a few days ago and crago build started yesterday and is about 80% complete.

FZJ80 rims and 315/75/16 Kelly Safari TSR tires

Low Profile Cargo Box

 

[xearth]

Nice cargo box and great build! Is the box secured to the floor or will the weight of everything inside be keeping it down?

 

[upcountry]

Haha! F-ing sick truck. Love it.

Good work.

Hows the freeway speed driving with those tires?

 

[xskydivingdudex]

Not terrible but should be alot better once i re-gear to some 4.88s

 

[Tim A]

Nice truck man. Out of curiosity in case I ever want to install a body lift, is there a way to move the ARB up to get rid of the gap?

 

[4RunAmok]

Very Nice!

3 things...
What's an O-ring mod?
What's an ISR mod?
And where did you get the projectors??

 

[xskydivingdudex]

Nice truck man. Out of curiosity in case I ever want to install a body lift, is there a way to move the ARB up to get rid of the gap?

Well mine will be adjusted soon enough... the only way is to cut the ends of the brackets and weld them up to accommodate for the lift.

Very Nice!

3 things...
What's an O-ring mod?
What's an ISR mod?
And where did you get the projectors??

O-ring is the subtle replacement of a seal in the manifold that replaces the D shaped one which increases air flow and allows for slightly better performance.

ISR is Intake Silencer Removal, which is replacing the intake silencer box with a piece of exhaust piping that is expanded at the ends to match the stock plastic and it will help with airflow which also leads to slightly better performance.

The projectors are not a full blown retrofit, they are almost like plug-n-play ones... i got them on ebay and they are great and i love the halos that come with them! they are one of my favorite things on my 4runner.

 

[Tim A]

Well mine will be adjusted soon enough... the only way is to cut the ends of the brackets and weld them up to accommodate for the lift.

OK thanks, good to know

 

[89s rule]

Nice 4runner. Im getting there, slowly but surely.

 

[TangoBlue]

Very nice - my favorite gen 4-Runner. Plus you can't go wrong with LC80 wheels - they make all trucks look good, right?

 

[CYi5]

Nice lookin' 35's!

 

[xskydivingdudex]

Well finally decided to take my last day of Spring Break to finish the low profile cargo box build... the structure itself is complete and all that is left is for it to be painted and carpeted. I added the two sides that can be removed for storage underneath and i have spring loaded hinges. I will be getting some better day pics tom.

I bought some locks for the box but have decided that i dont think im going to use them but its still under debate.