Recent content by 01tundra

What size wire do you have running from the vehicle battery to the charger and what's the approximate circuit length? If your input wire is too small, you'll have excessive voltage drop and won't be able to pass the rated current through the charger. That's why I have a 1/0 circuit ran from my...

Made a few more mods. Replaced our two 100ah Battle Born batteries with two 300ah FSK-300HP's. Also added a Victron Cerbo GX, a GX Touch 70 remote display and a couple Ruuvi Tag Pro's to monitor outdoor and refrigerator temps.

Truck engine at idle, ambient temperature around 85F, let it charge for about 45 minutes and saw no change in output.

Not bad :cool:

The stand-alone VE.Smart network has worked flawlessly for 4 years now via the Victron iPhone app. All of the chargers look at the battery status via the BMV-712 and charge accordingly. I've looked at adding a Cebro GX, but I can't really justify any need for one.

PKYS. I've had great experiences with them. https://shop.pkys.com/

Just upgraded from a 30A DC-DC charger to the new Victron Orion XS 50A. Ran 1/0 from the truck battery to a set of power posts about 3’ from the charger in the trailer, then 4 AWG to the charger (which is the largest size wire it will accept). It’s pretty impressive how much more compact and...

Decided to up my fire extinguisher game a little. Fabricated a bracket out of some scrap material for mounting a 2.5 lb Amerex under the driver's seat and mounted a second in the bed on the Built Right panel. The mount allows for full seat adjustment and is under enough that my feet don't hit...

I sure wish I would've kept my '01......

Wait....who you calling old? Get off my lawn!

They do and they cost approximately $60. They also have several complaints due to rusting very fast.

Since the tailgate and tail lights are a prime target for thieves (two replacement OEM tail lights are approximately $3,500), I decide to mess around in the shop today and do a few things today to hopefully at least piss a thief off and make them work a little extra........ Made a guard out of...

I really like them, gives lots of options for attachment.

Finally undid a mod that has been bothering me since the day I did it originally...... I wanted additional lights up front, so I purchased a KD Fabworks light pod mounting kit for the front which allowed me to install Diode Dynamics SSC3 Pro and SSC2 Pro LED pods below the factory LED fog...

Takes signal from the front door speakers and processes it for the woofer signal to prevent the factory bass roll off at higher volumes.