Recent content by AeroMoto

Hey BritKLR, any chance you can share the route from Red Rocks to Toole? I'd be interested in some or all of that

I've got an idea for when I finally get a trailer of my own. Have a side mount swing down tire carrier, probably behind the passenger's side wheel. Triangular frame. Mount the spare between the swing out frame and the trailer side. When it swings down, have a pop out leg to hold it at 90...

Thanks!

Maybe I missed it, but do you have a link to your trailer build thread? TIA!

Thanks Verkstad for you help. verdesard0g, I've been searching for the past week, and couldn't find it, so thanks for nothing.

I have an older Ramsey REP 9000 winch that I'm trying to get working. When I hooked up the power leads to the battery, I have 2 problems: 1) Solenoid clicks without input from remote (remote wasn't even hooked up). 2) "A" wire was shorting to the case and started to smoke. I did a little...

Not sure why the pics are sideways, just turn you laptop. :ylsmoke: The brake light separates from the stock tire carrier via the 2 Torx screws. Then I cut off the brake mounting piece with the grinder. The wire length might be ok without soldering, but I did it just to be safe. You could also...

I got a piece of 1.5" aluminum angle and mounted my stock 3rd brake on the top of the mast. Used a cut off wheel to cut off the brake light from the stock tire carrier. I unscrewed the 2 Torx screws to disconnect the brake light. Drilled 2 holes in the angle for the Torx screws. Then I extended...

I just bought a slightly used AEV 2.5 inch lift. I just realized that it didn't come with a U bolt. Most I have been able to find is the U bolt is 5.5" in length. Any idea the axle tube size? Also, where's a good place to buy these on the intertron?

How long did it take to put down the Dynamat? And did you do just the rear, or the whole Jeep? And how much did you use?

What type of boxes are those?

I just have mine in the sack it comes in under the seat or under my platform I built. I ended up wiring a connector in the back that comes out behind the rear rollbar mount in the back passenger side. I cut the MV's power line and added in a weather pack connector. So for my front tires I just...

Nice Jeep! Where'd you go in the Hoosier National Forest? I've been meaning to get down there and explore, but I don't know where to go. Any suggestions?

I'd like to see a write up on that! Looks very professional and secure.

Outdoor Products Stuff Sack, for bulky items like sleeping bags, pillows, jackets, clothes: http://www.amazon.com/gp/product//B004MCBICQ/ref=twister_dp_update?ie=UTF8&psc=1 $7.73, free shipping with Prime.