andy_b's latest activity
-
AI would go to your local spring manufacturer and have them make a custom leaf pack for your constant weight (confirm weight at a CAT...
-
Aandy_b replied to the thread Flatbed height over stock.Any flatbed can be mounted at bed height - that is easy. The question you need to figure out is if ”factory bed height” is the right...
-
Aandy_b reacted to Victorian's post in the thread The all new 2026 Total Composites Camper Kits! with
Like.
Our panels are sourced through highly respected suppliers in Germany. Lamilux, Koemmerling,Puren . We then cut and vacuum press... -
Aandy_b replied to the thread Flatbed height over stock.@rruff brings up a good point that the height of the deck is also a component of the camper clearing your cab, so pay attn to those...
-
A2" front lift is plenty, with probably none in the rear. Slide-in campers will be made for a lower bed, so if you put one on a flatbed...
-
Aandy_b replied to the thread Flatbed height over stock.What is your tire and suspension setup? Technically, these discussions are academic because the flatbed will be as high as it needs to...
-
Aandy_b replied to the thread Arctic Tern 550mm x 900mm classic window - $100 obo ABQ, NM.bump - $100!!!
-
ASomething to keep in mind if you are after a true flatbed, that height will typically dictated by wheel/tire travel. Ive built a few...
-
Aandy_b replied to the thread Flatbed height over stock.Idaho nailed it - the final flatbed deck height is ultimately dictated by your tire and suspension package, plus accommodations for...
-
Aandy_b reacted to DirtWhiskey's post in the thread School me on the subject of dc dc charging at 12v system. with Like.
Stress on your alternator? Upgrade your alternator. There are no cons. Do it. Before solar.
-
A14 years later, 126,000 miles, this thing is still working great. camping on the northwest end of Vancouver island with Westyss
-
AAt this point I believe that pretty much everyone knows your views on how every company building composite bodies has got it wrong, and...
-
Aandy_b replied to the thread Shocks or leafs first?.yes.
-
ARam Cab Chassis 3500 SRW here, used Alcan and paired with 2.5” fox with the high and low speed compression adjustment via Accutune. Did...
-
Aandy_b reacted to Victorian's post in the thread The all new 2026 Total Composites Camper Kits! with Like.
Sorry Yes yes yes we are a bit behind with website updates :-) We have been asked for kits from private buyers on a daily basis and...