aschafer14's latest activity
-
Aaschafer14 replied to the thread Holset HX30 Turbo on a Fuso 4d34T?.I've been trying to find an oil drain fitting/adapter for the block side. Does anyone know what this fitting size is? The parts diagram...
-
-
Aaschafer14 replied to the thread Holset HX30 Turbo on a Fuso 4d34T?.It looks like these industrial/forklift manifolds might have the right mating flange but fitment may be an issue as these orient the...
-
-
Aaschafer14 replied to the thread Holset HX30 Turbo on a Fuso 4d34T?.@soaringpotato Looks like you are correct. After some more digging I found an image of a stock manifold gasket with the same bolt...
-
-
Aaschafer14 posted the thread Holset HX30 Turbo on a Fuso 4d34T? in Japanese Heavy Truck: Mitsubishi and Isuzu.Has anyone swapped out their TD05H for a HX30. From what I found online the the manifold flange should be identical. I have one on my...
-
Aaschafer14 reacted to soaringpotato's post in the thread Need some help diagnosing a motor with low power. 2004 Fuso FG649 with
Like.
I just installed a boost gauge in mine. Will give the truck a spin this weekend and report back. -
Aaschafer14 reacted to soaringpotato's post in the thread Need some help diagnosing a motor with low power. 2004 Fuso FG649 with Like.
Mine tops out at 10psi as well
-
Aaschafer14 replied to the thread Front End Clunking/Clicking While Turning at Low Speeds.I got antsy antsy and changed the fluid and added in some of the Motorcraft/Ford friction modifier this afternoon and I am happy to...
-
Aaschafer14 replied to the thread Front End Clunking/Clicking While Turning at Low Speeds.Well that is definitely worth a shot, that would be amazing if it was just a fluid change to fix it. I'll give it a try in the next...
-
Aaschafer14 replied to the thread Front End Clunking/Clicking While Turning at Low Speeds.I replaced the bearings and races with new Timken's, I really thought it was the bearings too. I thought it might be the 4wd but the...
-
Aaschafer14 posted the thread Front End Clunking/Clicking While Turning at Low Speeds in Japanese Heavy Truck: Mitsubishi and Isuzu.I am trying to diagnose a noise coming from the front end while turning, it only happens when turning at low speeds and only under...
-
Aaschafer14 replied to the thread Anyone repack their own wheel bearings?.I'm trying to get those tools fabricated before I start pulling things apart. Does anybody recall what the diameter of these pins on the...
-
-
Aaschafer14 replied to the thread Anyone repack their own wheel bearings?.It looks like the Timken 32011X and Set1041 are the same part just referenced differently for some reason. Same with the 32012x and the...
-
Aaschafer14 replied to the thread Anyone repack their own wheel bearings?.So I'm about to order parts for my 2004 FG649 and this is the parts list I've come up with. The Timken bearing listed earlier in this...
-
Aaschafer14 replied to the thread Need some help diagnosing a motor with low power. 2004 Fuso FG649.Well I got the new injectors and unfortunately didn't make much difference. I'm thinking I need to figure out why I'm not getting boost...
-
Aaschafer14 replied to the thread 35" vs 37" Tires.We have our AAV 17x9 rims on order so we are locked in on the 17" rim. I don't even know if the offer 16" rims anymore as that wasn't an...
