Recent content by ebg18t

  1. E

    Midland MXT400

    Wow. Thank you so much for the explanation. I need to review a few more times to unpack this completely.
  2. E

    Midland MXT400

    @DaveInDenver - Can you provide some clarity on how the Laird 1/2 wave Antenna I linked above (we have been using for a bit) would compare to the Laird 5/8 over 5/8 linked below (BB4505CN) or even a longer 1/2 wave from Laird. In looking at the Laird site the vertical beam width is much narrower...
  3. E

    Midland MXT400

    We have been using the Laird NGP 2.4db gain antenna linked below with our Midland 275’s (15w radios). I found it to provide clearer transmission and better range than the midland longer 6db gain antenna I bought First. Primarily used in dense forest area with lots of elevation changes, ie lots...
  4. E

    Better way to attach to battery?

    it actually goes thru a breaker which isn’t visible. yes. Maybe I’ll try that.
  5. E

    Better way to attach to battery?

    I’m running the STech system to control lights, fridge, etc. but I don’t like how the 12v+ lead attaches the battery. Is there a cleaner way to attach to the stud vs how I have it done (based on the instructions)? Thanks
  6. E

    Colorado owners likes /dislikes

    The 8sp tranny shutter appears for the most part eliminated now that the proper fluid is being used. There was a TSB and folks are getting a double flush with the proper fluid and the results look promising. It seems the ‘20 forward models were filled properly. The ZR2 is great for what it is...
  7. E

    my experience with GMRS so far

    Even know I have my tech lic., I’m pondering adding one of these Midland Micro’s since so many folks like to use these handhelds.
  8. E

    insulated cab bag suggestion wanted

    We have both AO & Yeti soft sides. I dont think the Yeti works any better than our AO’s.
  9. E

    2019 Colorado ZR2

    Lookin good. Just got my ZR2 this weekend and trying to decide on shock skids now.
  10. E

    Fridge Slides

    It holds the fridge to the slide. There is a strap on the back of the fridge too.
  11. E

    Fridge Slides

    I had great luck with the Front Runner fridge slide in my old 4Runner.
  12. E

    Suspension Thoughts or Comments

    I would suggest calling DownSouth Motorsports. They custom valved my Fox setup and it was awesome. See what they suggest as they do a ton of custom valving for folks.
  13. E

    Edgestar Fridge vs Yeti Cooler

    We used a Yeti cooler for years. But once we installed the Engel Fridge we never used the cooler.
  14. E

    What SD cards are you using?

    I have been using the Sandisk Extreme Pro & Lexar Professional. Not sure if one is really better than the other. But both have been solid.
  15. E

    FS: Engel MT-45 with Transit Jacket - Tampa Bay, Florida

    Sold and picked up.
See more
Top