ExpoMike's latest activity
-
ExpoMike reacted to Jenzz's post in the thread My 2016 RAM 2500 Hemi, the Doghouse Dodge Build with
Like.
Hey everyone, after lurking on ExPo for way too long and stealing tons of ideas from your build threads, it’s finally time to give... -
ExpoMike replied to the thread Pics of your VAN! Post up!.Figured I would add some updated pics after the high top was installed. Working on the build out now but moving slow. Getting old sucks!
-
-
ExpoMike reacted to smokejumper98's post in the thread Home Build Composite Panel Flatbed Truck Camper with Like.
The process to make the panel was not difficult but time sensitive. Polyurethane adhesive is temperature sensitive. The warmer the...
-
ExpoMike reacted to smokejumper98's post in the thread Home Build Composite Panel Flatbed Truck Camper with Like.
Next, I turned my attention to welding up the aluminum exoskeleton. The exoskeleton was made from 4x2x1/8 aluminum 6061 angle iron. I...
-
ExpoMike replied to the thread Overland Sprinter Build.Ah, that makes total sense. Thanks for that info.
-
This van was Monstaliner (urethane bedliner) coated about 10 years ago. I later discovered that the factory primer was not properly...
-
2014 Ford E350 Extended 5.4L
-
ExpoMike replied to the thread Overland Sprinter Build.So I am curious how you got the texture from a paint that should normally be smooth? I didn't think that Majic was a "Raptor Liner"...
-
A few notes on using the Majic (tractor supply) equipment enamel. Catalyst/hardener is required if you want any real durability. You...
-
Took a few days of prep, but shot the van with a couple coats of single stage catalyzed enamel.
-
ExpoMike replied to the thread 2013 GMC Savana 3500 Overland Build.A little more free time and good weather so I was able to complete a couple jobs on the van. First up was finishing up the wiring for...
-
-
ExpoMike replied to the thread Dobinsons MRR review.A good Budd of mine was the R&D manager at Bilstein for a lot of years. He explained to me what low speed and high speed settings are...
-
ExpoMike replied to the thread 2013 GMC Savana 3500 Overland Build.Then I was able to get the new rear camera/third brake light unit installed. I got the cable ran front to back and just need to finish...
-
-
ExpoMike replied to the thread 2013 GMC Savana 3500 Overland Build.Got some free time and good weather so did a couple projects on the van. First up was installing the Banks iDash and Pedal Monster...
-
-
ExpoMike reacted to vintageracer's post in the thread I can finally be called an Old Man again as I bought another Old Man Van this week! with Like.
I can finally be called an Old Man again as I bought an Old Man Van this week! Bought another 23 Foot GMC Transmode coach with a...
