Fadeagray's latest activity
-
Here is recent and relevant information on repairing my MaxxAir 7500 fan after its circuit board failed due to charging LiFePO4... -
Great write up and photos. Thanks! I think my biggest problem was reassembling the brush cap first and trying to insert into the...
-
Fadeagray replied to the thread MaxxAir Fan problems and solutions.Continued - Hold down on armature shaft while lowering motor body over armature / brush assembly. Make sure that wire pass through is...
-
-
Fadeagray replied to the thread MaxxAir Fan problems and solutions.These are my steps for a rebuild. Pictures: - Tools Used - Cleaning Supplies - Remove Snap Ring - Remove motor body screws while...
-
-
Fadeagray replied to the thread MaxxAir Fan problems and solutions.The bearings are identical to the Maxfan bearings. The part number stamped on the bearing is the same as well. I’ll post up additional...
-
Fadeagray replied to the thread MaxxAir Fan problems and solutions.I’ve been using two Maxxaire fans in my habitat full time for six years. Both fan motors have needed to be cleaned once or twice a year...
-
-
ITTOG.....did you guys happen to stay at the Hyatt ? That was our go to place. There's a massive rock about a quarter mile off shore...
-
We'd walk through the forest filled with fairy tale looking trees..... I have no idea what's up with these trees but they were fairly...
-
The third creek that our hike took us across was named Crooked Fork Creek.....this one was clearly the smallest of the three...
-
Fadeagray replied to the thread Durable, colorful packing cubes?.Purchased these from Amazon last week to replace old Eagle Creek cubes. The quality is better with less mesh to tear.
-
