Ferjablito's latest activity
-
FFerjablito replied to the thread My Fuso4x4.Thanks, I'll take note and change the quality of the aluminum. I imagine that, like yours, my rims are centered on the axle. The first...
-
-
FYes, 6061-T6 is typically used for wheel spacers, but be mindful that most wheel spacers are used on cars, not trucks. The loads and...
-
FFerjablito replied to the thread My Fuso4x4.If the spacers can be legalized, I'm almost certainly going to opt for a hub-centric design, using 10.9/12.9 bolts or studs and 6061-T6...
-
FFerjablito replied to the thread My Fuso4x4.Sorry, I use a translator and I must not have explained myself well. Regarding the rims, I know how they work. My question was more...
-
FFerjablito replied to the thread My Fuso4x4.Do you know of any colleagues who have reduced the offset from +90 to +50 with 4 cm spacers per wheel? The best idea would be to make...
-
FI have always thought that the OEM placement of the rear shocks was very inefficient on these trucks. Your modifications look good, but...
-
FFerjablito replied to the thread My Fuso4x4.https://youtube.com/shorts/00c0NUKosI4 Meanwhile we are busy with the lower boxes and skirts
-
FFerjablito replied to the thread My Fuso4x4.https://youtube.com/shorts/GEbdnAqrnKQ
-
FFerjablito replied to the thread My Fuso4x4.We have placed a rear and left stabilizer bar from the C718 model that shares chassis measurements and requires little adaptation, we...
