gator70's latest activity
-
GWOW, a 7 foot (213cm) wide, by 6 inches (15cm) high 2 inches (5cm) thick bumper in steel is apx. 285 pounds (129kg) :oops: Add this...
-
Ggator70 replied to the thread Isuzu npr 4wd.Wish I could use grommets My bumper is 2 inches thick
-
GThe OP asked for opinions. I gave mine on price, on chassis and on the trend of overpriced under capable Sprinter builds in general...
-
GI have found two truths in my way to many years here. 1) Every vehicle has compromises. There is no silver bullet. Based on their own...
-
Ggator70 replied to the thread Isuzu npr 4wd.Its time to wire my rear bumper for lights. My bumper has no holes yet. What is good practice to drill the hole for the light wire and...
-
Ggator70 reacted to Joel Karl's post in the thread Global Expedition Habitat mounted on a 2022 International "Lower Price" with
Like.
adam88 you are correct. Just like the 2022 ADV Mobil ProLander (5/25/2025) bid to 201,000.00 and sold later for over 300,000.00, and the... -
Ggator70 replied to the thread Isuzu npr 4wd.I might not fix any points - I did see one with bump stops on youtube Just a limit on subframe travel close to the truck cab
-
-
Ggator70 replied to the thread Isuzu npr 4wd.I'm spacing my subframe and truck frame with a non metal spacer. So when there is movement, there is less of a frame slap when the...
-
-
Ggator70 replied to the thread E-350 box options.https://forum.expeditionportal.com/threads/isuzu-npr-4wd.243041/
-
Ggator70 replied to the thread Isuzu npr 4wd.Isuzu 4x4, better than mine https://www.wandervoyager.com/npr And 300% more expensive
-
Ggator70 replied to the thread E-350 box options.In California, to avoid commercial vehicle registration, you need a homecar exemption. They then register it as a auto. BUT! The DMV...
-
GMy understanding is that if I buy a cutaway, CA DMV considers this an incomplete vehicle which cannot be immediately registered. You...
-
Ggator70 replied to the thread Isuzu npr 4wd.Horseshoe shaped dinettes. (seating / dining areas) Many habitats have them including mine. Does anyone have pictures where the...
-
Ggator70 reacted to DirtWhiskey's post in the thread Spring mounted subframe on short chassis. with Like.
If you're concern with frame flex I'd avoid a complex mount and bolt the rear of the frame with spring hangers going forward. Spring...
-
Ggator70 replied to the thread Spring mounted subframe on short chassis..With such a short frame, the twist will be minimal. Body mounts with huge rubber vibration isolation may be all that's needed. About...
-
