gator70's latest activity

  • G
    gator70 replied to the thread Isuzu npr 4wd.
    With the slide out platform it uses 600lb ball bearing slides. To build the platform, I found a industrial heavy weight capacity...
    • 1761511665390.png
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    Still working on my slide out tray and staircase (example below) I estimate the tray will be 42 inches off the ground.
    • 1761498268364.png
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    I also learned from that video. Rain on composite habitats cause water flow over the entry door. They need a rain gutter. Possibly...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    I just watched a video, where each week off-grid, with two people consumes 35 gallons of fresh water. And about 12 gallons of drinking...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    Yea, I evaluate the small 100 psi 110 vac compressor. Normally costs $60 new. Fits in my storage compartment. And my habitat has an...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    Boy do these rigs need a long list of equipment to be stored. Do I really need a expensive 12v air system, as originally planned? I have...
  • G
    gator70 replied to the thread My Fuso4x4.
    Looks nice! You need congratulation
  • G
    gator70 reacted to OverlandVanProject's post in the thread Rossmonster Havn with Like Like.
    My two cents on the options The havn is the best construction of the 3 (aeon euphoria havn) for sure. The other two are really…...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    I very much appreciate the information When I worked in NASA engineering I learned even the most analyzed engineering required...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    His PhD thesis was about design techniques for offshore wind turbines that are evaluated and discussed, with a focus on two primary...
  • G
    gator70 reacted to SkiFreak's post in the thread Isuzu npr 4wd with Like Like.
    Welders get certified by proving that the welds that they do meet the specified standards required. This is usually done via x-ray or...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    My welder seems to do really good work. I would love to learn more about this so I can check the work. Does anyone have resources for...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    I'm pretty happy with these discussions. As there is no once source to locate perfectly accurate information. Looking back on my...
  • G
    gator70 reacted to luthj's post in the thread Isuzu npr 4wd with Like Like.
    Every manufacturer has their own secret sauce so to speak. So any data, even if I had it for your approximate material, isn't going to...
  • G
    gator70 replied to the thread Isuzu npr 4wd.
    Most if what you say is correct. In the four season designs the weight is greatly increased by all heavy items installed within. (my...
    • 1761271595583.png
Top