Recent content by -joz-

Hello ! here a little update Now it's winter and time to use the woodstove the exhaust from the woodstove is made of stainless steel and i made a handflap for heat regulation at the first testdrive some branches of trees got stuck between the campershell and the awning now it...

Jup... a insulation would be better but i have not enaught space for the insulation.... But when i start the heater it needs only 10 minutes to heat the water up to 75 °C (167 °f) I had the choice more watervolume or insulation and i decided for more water :-)

hello everybody ! here a little update for today the next thing was is to build two boxes in the rear left and right for more storage first i had draw it on the computer and designed it it must fit to the fenders and rear it must have a slope angle ... and i made it also from stainless steel...

ok now i continue my post from the rear suspension conversion the next thing is i needed a construction to lift up my spare tire, my enduro bike and a big box for more storage i have draw the whole thing on CAD ok that looked good and i build it with construction tubes and some sheet metal...

Hoi nosedive en gruess zrug :-) ! ja die scheiss internetsite woni all bilder ufeglade han isch irgendwie kaputt! Oh no ..... thats not good :-( i hope this hosting service wil come back again otherwise i have alot of work for upload these pictures again :) ok i write a small introduction for...

why is this not a good idea ? the camper is placed on the original bridge from the truck and this bridge is a very strong and solid construction i have made now 4000 miles with this shocks and it worket very well

thank you ! I will give my best ! its alot of work and we will leave in aprill next year are you in baja now ?

After the first long test drive i notice a big problem in the rear are biiiiig leafsprings with addition leafsprings on the top of it ... and no shockabsorbers in the rear .... over every bump on the street the rear axles bounce very much and sometimes the wheels didnt touch the ground :-D the...

hi everybody i have another little update for you i have install the rear batteries underneath the floor it's total 4 batteries with 240 Ah each two in the rear and two in the front on the roof are 2 pices of 300 watt solarpannels i put the whole electric under the bench a mppt solar...

Hello ! I have news about my truck the kitchen is done and here are few pictures from the build the best thing on my truck is the location of the cooler : its accesible from in and outside you dont need to go in the truck to take a beer :-) first i made the countertop of...

Hello here is a little update from beginning build up the interior in the rear i build the bedroom with 2x 50 gallons watertanks under the bed in the front on the left side i build 2 benches for sitting with a table on the right side is the place from the wood stove the sittig area can...

Thank you shortbus4x4! I love the nothwest from usa! And we will definitive viste idaho ! Do you know good offroad trails for camping ect? Or is in the www any good sites for searching cool offroad routes in the states? We have one ore two years to travel in the usa and canada before we go...

Hello ! next step was we need a passage from the shelter to the truck cabin first i have tested how much get over the cabin to the shelter and it was little ... a half inch maximum my idee was to build two frames and conectet with a firehose

Hi Grenadiers I do the same! Have change all the oils and fluids on the truck We do a little test drive to france and spain and the saurer do his job great! Now its a few little things to finish the project Next Spring we ship our truck to halifax and start our roadtrip from alaska to...

Hello ! the time is running and i had not time to ubdate the post i hope i find more time now here a little update from my project time for a bigger diesel tank now i have 100 gallons on the left side and 45 gallons on the right side i have saw a vice on a old trucks frontbumper and i...