lanceatm's latest activity
-
lanceatm reacted to soaringpotato's post in the thread Trouble sourcing Fuso FG parts online with
Like.
Wanted to give a plug to these folks -> https://importtruckparts.com/ They've been a great source of used parts for my Fuso that I... -
lanceatm reacted to soaringpotato's post in the thread Trouble sourcing Fuso FG parts online with Like.
I ended up purchasing the parts catalog from a super sketch site but it's been a goldmine of info. Being able to lookup part numbers...
-
I just sold the EXP, so keeping the TN.
-
lanceatm reacted to aschafer14's post in the thread Front End Clunking/Clicking While Turning at Low Speeds with Like.
I got antsy antsy and changed the fluid and added in some of the Motorcraft/Ford friction modifier this afternoon and I am happy to...
-
lanceatm reacted to Howard70's post in the thread Front End Clunking/Clicking While Turning at Low Speeds with Like.
@Aussie Iron's proposal is likely. I've had two Canter FGs (2014 & 2017). Both developed noises exactly like you described. Draining...
-
lanceatm reacted to Aussie Iron's post in the thread Front End Clunking/Clicking While Turning at Low Speeds with Like.
Yes, there should be a snap ring that holds the axle in the hub. Undo the little allen key screws and remove the outer part of the hub...
-
lanceatm reacted to Aussie Iron's post in the thread Fuso FG - best year and other questions with Like.
Me. I'm going to tell you to get a 2000 model FG637 or similar in the USA. No computer, N/A, need to fit a turbo. Manual gearbox with...
-
lanceatm reacted to SkiFreak's post in the thread Fuso FG - best year and other questions with Like.
In my opinion, the FGs fitted with the 4.9L 4M50 engine were the best overall. When Fuso went to the 3.0L engine it was the start of a...
-
Who the heck needs 60 pages to use Starlink? Ours has been permanently mounted on the roof of our camper for 3 years, over 50,000 miles...
-
lanceatm replied to the thread The EarthCruiser MOD Slide-In Camper Is Available Again.This is a old mock image we did a few years ago i came across it again today. We have direct fitted the campers to the chassis in real...
-
-
lanceatm reacted to mog's post in the thread Are ARB the only player left for simple large frame winch bumpers for 4th gen Ram 2500? with Like.
I know you are asking about front, but I'll toss in my experience with rear winch bumpers, if case that will be helpful to someone...
-
lanceatm reacted to Ferjablito's post in the thread FUSO in USA - they have done more than most people know with Like.
Well, here in Europe, three-quarters of the same thing happens. Protectionist policies regarding electric vehicles seem to be the...
-
lanceatm replied to the thread 35" vs 37" Tires.Greetings We started with a 16`s wheel with the FUSO . The single biggest reason we did not start with the Isuzu was there brake drums a...
-
lanceatm replied to the thread 35" vs 37" Tires.Quick chime in here - all of the fist Ec`s we made where on Michelin XZL ( ~37 ) . With our need as a second stage manufacture passing...
-
I agree with @GR8ADV. I went from stock to 37/12.5-16s ( Falken Wildpeak) on my 2002 FG and it was the single best improvement. The...
