Recent content by lumis

I second what Rin did, I just flipped the slimline rack and made some small notches in the mount to allow it to flip and big wind faring with the small faring on top. made a noticeable difference.

that was quick.

if your interested, 25% off the exped megamat duo 10 for Labor Day https://www.backcountry.com/exped-megamat-duo-10-sleeping-pad

Yeah not a big deal just wanted to point that out, I have one of the first few campers that came into the states and recently was able to borrow a newer one when I was having some work done on my truck and realized that my hatch was way bigger then the newer one. meaning if I did that I would...

keep in mind if you remove it that your tent canvas will come down into the canopy area when the top is closed.

Hi, give this a look

Alu-cab says the rear wheel carrier will handel up to 33 inch. Anything much bigger than that will likely interfere with the doors latching mechanism.

I use the OME HD Dakars. it did settle some with the weight of the camper but not a lot, if I had to guess maybe 1/4-1/2 an inch fully loaded after almost 2 years with the canopy camper on. check and make sure you did not accidentally receive the medium-duty. Also, it is my understanding they...

I used the one on this page: http://www.rostra.com/keep-camera-system-when-removing-truck-tailgate.php

I think the question of silver vs black is a non point unless you are sleeping in the day in direct sun. Aluminum cools off quickly and one of the most thermal conductive materials. After the sun is gone it pretty much retains none of the heat of the day. I live along the gulf coast where it...

Nothing special just some cheap ones from amazon https://www.amazon.com/gp/product/B07MV7T5GZ/ Alu-cab sells a rain kit for this very reason but this was an easy thing to throw together myself. and I prefer a taut-line hitch knot over one-inch webbing with buckles

for the water pools on the shadow awning I just got some tarp clamps and tied some line with a taut line knot to the stakes. Here is a picture you can kind of see it, sorry had to zoom.

I had some 1-inch webbing from an old backpacking hammock that I replaced with better suspension straps so I used that webbing to connect around the top of the bed platform to connect the 2 sides. I initially thought about doing some rivnuts into the bed structure with eyes for connecting it...

If anyone is interested I put the brog land cruiser attic in my camper this is the long bed camper so if you have the short bed version it would probably fit better. I did have a cheap amazon one and stuff constantly fell out so figured this would work better.

Jeromy Johnson Logistics91@gmail.com