Michael Brown's latest activity
-
Michael Brown replied to the thread Gen 3 2002 Montero head gasket.Glad to hear everything went well. I did my last timing job in 2020 during a work furlough. Spent 3 stressful days working in the... -
Michael Brown reacted to spacecowboy7777's post in the thread Gen 3 2002 Montero head gasket with
Like.
Of course I did an oil change after a few minutes run time and a new air filter. Will probably do an oil change with an oil filter in a... -
Michael Brown reacted to spacecowboy7777's post in the thread Gen 3 2002 Montero head gasket with Like.
We're back together! Heads machined, new seals everywhere, timing belt, one exhaust manifold that had a bad crack. Overall, it wasn't...
-
Michael Brown replied to the thread Gen 3 2002 Montero head gasket.Good luck, hope it all goes well! If you get stuck, refer to the FSM. Youtube also helps, but sometimes you need to search Pajero to...
-
Michael Brown reacted to spacecowboy7777's post in the thread Gen 3 2002 Montero head gasket with Like.
Thank you! Ended up going with a mahle kit. I’m in deep now
-
Michael Brown replied to the thread Gen 3 2002 Montero head gasket.Others may have some insight as well. I did my timing ~6 years ago, so it has been awhile. I used RockAuto and PartSouq for these...
-
Got my air box mounting finalized, just needs an 1/8" nipple for a vacuum line and paint.
-
The ride height is 1.5" lower in the rear, I got some Mopar 2" lift coils for $100 shipped. I'll get those installed and then adjust...
-
Got the coil buckets modified for the Wrangler coils, this was simple and could be done a couple ways. Either a smaller diameter ring to...
-
Michael Brown replied to the thread 2004 Montero.Depends one why you want the bumper. It is one of the few available units for these. As extra protection it is good, but these are...
-
Michael Brown replied to the thread 2003 Mitsubishi Montero LTD P0300 Random Misfire & P0660.These engines are known to have some valvetrain noise, but it wouldn't hurt to replace the valve adjusters if priming doesn't work...