pappawheely's latest activity
-
pappawheely replied to the thread Fuel Transfer Problems.Depending on where your jerry cans are mounted, you might want to have a one-way check valve in the line. That way it won't try to... -
pappawheely replied to the thread The Trooper/Blazer I call Blooper..I'm having to think 2 or 3 steps ahead as I go. Why would I mount only a 4K winch on the back? To lift my spare tire onto the carrier...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..I went out to the shop and fabricated some sheet metal panels to seal the rear quarter panels, but now I'm eating nachos, watching KOH...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..I was hitting the quarter panel with a hammer and found another pile of paydirt. I got the bumper ends done and painted. Of...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..The other side is roughed out. More bracing and full welding still needs to be done. The trailer hitch fits in the middle.
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..More work on the rear bumper, corner mods. There's no instruction manual; just try stuff and figure it out. I really didn't have a...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..The last two days have been nuts. You should hear about the stuff I don't post! :ROFLMAO:
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..OK, enough head scratching. I had to dive in today and start cutting. I had some success and other shortcomings. I know what to do on...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..Time to work on the rear quarters. I'm going to trim the bottoms off and run a slider like on the rockers. It will run down the side and...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..Once I figured out the pie cut technique I made a passenger and driver side bar in a little over an hour. Now I need to make two more...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..I tacked together a bunch of scrap to prototype the first leg of the exoskeleton. On the bottom kink I cut angles and butted it...
-
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..I made a couple legs for the sliders, but didn't like them, so I made new ones. These will go under them to give more support. I cut...
-
-
Good progress and high quality work. Many thanks !
-
More, please. Your journal is an inspiring journey of ingenuity, mostly beyond me. The insane masterpiece in-progress is especially...
-
pappawheely replied to the thread The Trooper/Blazer I call Blooper..Did a ton of welding today. Six plates welded to the frame. When it comes to stacking dimes, I'm the best as long as it's someplace...
