rruff's latest activity
-
Here are some from our life in suburban San Diego. We were blessed with some nice ponds on our compound. -
Outside my (previous) home office in Dubai. My current home office doesn't have a decent view. Will post some urban wildlife pics from...
-
Great kookaburra shot!
-
Cheers, Peter OKA196 motorhome
-
-
rruff replied to the thread 2016 F-250 Rear Springs- Deaver or Alcan?.I bought a 4 leaf per side add on pack from Boise Spring, and installed them myself... but I didn't have to deal with bushings. It was...
-
I’m not the OP but my Alcans continue to be great. I upgraded to a ’24 F350 and Alcans were one of the first mods I did. I didn’t...
-
rruff reacted to 86scotty's post in the thread coil-over springs versus leaf springs on E350 camper with
Like.
I've had lots of Quigleys and never had death wobble. Not to mention the millions (literally) of solid axle coil sprung trucks running... -
rruff reacted to 86scotty's post in the thread coil-over springs versus leaf springs on E350 camper with Like.
This is a bit off subject but deserves sharing. I run E rated A/T tires on my vans, always have, and cover a lot of interstate where I...
-
rruff replied to the thread eye opener about gvwr.It's very common, maybe even typical to add ~3,000 lbs with a light offroad camping setup. Even on a 1/2 ton. People underestimate how...
-
rruff replied to the thread coil-over springs versus leaf springs on E350 camper.Or just air down.
-
rruff replied to the thread eye opener about gvwr.This shows some numbers for a Gen3 Tundra with an overlanding build and a small pop up camper. Oem curb weight= 5,800 lbs, GVWR =...
-
rear: 3.0 x14 with 4 tubes front: 2.5 dsc with 500lb springs. They were all refinish with cerakote, I was hoping to get some secondary...
-
I present to you Razortop. I wanted the functionality of bed cap, but I'm not a fan of the way they look on gen 2/2.5 CM, specifically...
-
rruff reacted to The Artisan's post in the thread 2021 TruckHouse BCT – Edition 001 $310,000 with Like.
I will see if I can find it maybe IG..It was early when they were starting to go to shows..Even the carbon fiber part that integrates...