rruff's latest activity
-
rruff replied to the thread pivoting frames and mounting campers.How are your bed mounts arranged; do you have a diagram? -
rruff reacted to Waltzing Matilda's post in the thread Four Wheel Grandby found on San Diego CL (No affliliation) with
Like.
Not my truck/camper: This is a 2 days old (as of February 1) CL post someone else might want to explore: 2006 F-150 + 2004 Four Wheel... -
rruff replied to the thread Portable Power Not a Generator.W (power) or Whr (energy). For me it's the laptop. Up to 80W when using the video card, 15-20W otherwise. Starlink is about 20W. It's...
-
Sounds like insulating first will most likely prevent any issues. Right now the roof is just galvalume so it is like a radiator in the...
-
rruff replied to the thread Somewhere near Yuma.What you were using was probably polyester resin (with MEK added to set off the reaction) with something in it to make it thick. This is...
-
rruff replied to the thread Portable Power Not a Generator.You can buy or build it. Large power stations are very common, and you can add expansion batteries to it. A pair of these would be $1800...
-
rruff replied to the thread Somewhere near Yuma.I'd guess Bondo would work fine to fill chips. You can buy gelcoat as well. I've never tried to do fine finish work.
-
rruff replied to the thread Vehicle advice, offroad vehicle with low horsepower is it possible to buy in America?.Yes, 4x4 and low range. 4runners could be had in 4cyl up to 2011. There may have been a similar Nissan variant as well.
-
rruff replied to the thread Somewhere near Yuma.It's stiff for foam, but it will bend. The curved parts were made by bending and gluing two layers of 3/4". There are definitely seams...