Recent content by shoredreamer

SOLD All good things must end and I am reluctantly selling my iKamper Skycamp RTT. I’ve been using an iKamper for the last 8 years on the top of my 80. My kids have grown up camping in it, but they are now just a bit too big (13 and 9) that we’ve outgrown the RTT life for our family of 4. With...

It looks like it may be a parts choice and install error. From what I see you had RCL legs onto a truck cap track system. RCL legs are the incorrect leg to use with a track system. Whoever sold and installed those did it wrong. You need RLT600 or RLTP legs which use 2 bolts per leg. Also, the...

If you are looking for a replacement set of latches, email me at chris@rhinoadventuregear.com our shop has some in stock. But if it’s just hardware you need to fix the problem, I’d suggest just replacing those. I can find you the correct specs on them. It would be a much easier, cheaper, faster...

I think one of the lightest 270s is the Freespirit, Spec’d at 37#. It’s also fairly compact package when closed up and has wall options on all sides and square back. It’s rather easy to open with single rear pivot and a roomy enough bag to pack away easy. The Crosswing is actually rather heavy...

The Odyssey is easier to close than than their Evolution models, mainly due to the fabric “plyability’ and how the two halves join, along with the front lip vs latch system. It is slightly heavier than the previous model. I can get an official weight in a couple days, as I sell these at the...

What brackets are you using to mount the JB to the SLII? You could offset the tent so that you get slight overhang on the awning mounted side. Or if possible, mount the awning on the underside of the SLII. To use the tunnel awning correctly it doesn’t require specific orientation relative to the...

Just for you Ali! Haha! just Have the one i added.

@alia176 you can add the iKamper Exoshell to the 270 list. only hard case 270 I know of in the USA. Closed 96.5” long Case is 7” out 6.4” tall 121 sq ft shade 66# $1750 includes brackets

No, it is the Skycamp 2.0.

I got my hands on our shop demo model ExoShell last week and will be running it on my personal 80 for the Fall and Winter. Some initial thoughts and observations. The ExoShell is a totally new design awning from the ground up, designed and made by iKamper. The hard case benefits, in my opinion...

@Obsessed2findARuggedHybid hey there, if California isn’t too much of a drive, the shop i work at (Rhino Adventure Gear) has one Terrapod in stock. It’s a little closer than Georgia for sure. Just trying to help you out. You’re correct, the Terrapod is a rad tent and made in the USA. Shipping...

Yeah the sail tracks are different size, ARB to Eezi. For the side wind break on the Swift I used ARB 813207 2M front break. To attach it to the side arms, I drilled 6 snaps into the top of the arm and the corresponding button snap into the fabric. So snap it in 6 spots and you’re done. For the...

Do you have the K9 rack already on your 80? What is the width of the rack? Standard JB tent is 54” wide and the flush mounting tracks are about 28-29” apart. If the JB rails line up with the K9 crossbars, you probably just need spacers so that the crossbar and tent rail meet each other to be...

I sourced all quick connect fittings for my hose going from the 5lb tank to my stove or bbq. It’s quick and lessens wear and tear on threads.

Is this what you are looking for? im sure you can use 1 or more to create a wind break or room. https://www.rhinorack.com/en-us/products/sport-leisure/shade/accessories/batwing-compact-tapered-zip-extension_33104