SkiFreak's latest activity
-
SkiFreak replied to the thread Isuzu npr 4wd.What do you want comments about? Ask specific questions if you want other people's opinions. One comment I would make immediately is... -
SkiFreak replied to the thread 99 FG Starts, runs rough, won't rev up.Are you sure it not just a sticky part problem? I am not familiar with this specific fuel injection system, but it shouldn't fail...
-
SkiFreak replied to the thread 99 FG Starts, runs rough, won't rev up.You could possibly call, or visit, a Fuso dealer and ask to speak with a senior mechanic. You might get lucky. Personally, I have had...
-
SkiFreak replied to the thread 99 FG Starts, runs rough, won't rev up.Before spending any money on replacement parts, take a step back and do some basic checks. Some simple fault finding should be the first...
-
SkiFreak replied to the thread 99 FG Starts, runs rough, won't rev up.You should be able to access the error code/s by using the blink code method on the dash. That will give you a much better starting...
-
SkiFreak replied to the thread Isuzu npr 4wd.Normally, if you fabricate something from scratch you get exactly what you want. Modifying an existing product can be beneficial...
-
Good luck...
-
SkiFreak replied to the thread Isuzu npr 4wd.Maybe you should use ChatGPT for all of your future questions, given that you seem to have so much faith in its accuracy. Personally, I...
-
SkiFreak replied to the thread Isuzu npr 4wd.Neither axle should be overloaded at all. :oops:
-
SkiFreak replied to the thread Isuzu npr 4wd.That is on flat ground, but it does not take into account how much weight would be over a single tyre if your going up an off camber 4WD...
-
SkiFreak replied to the thread Isuzu npr 4wd.From my understanding... the original plan was to go with the Australian manufacturer, which I suggested was not an optimal solution...
-
SkiFreak replied to the thread My Fuso4x4.True, but this type of pipework is normally installed in a house, not a vehicle that has to deal with continual vibration. Each one of...
-
SkiFreak replied to the thread My Fuso4x4.I think that you may have missed a zero in there...
-
SkiFreak replied to the thread Isuzu npr 4wd.For a ladder that is mounted vertically on a composite panel, the majority of the forces will be in shear. Bonded attachment points...
-
SkiFreak replied to the thread Isuzu npr 4wd.Where do I start? Wow! That's a very open ended question... If you want to know the surface bonding capability of anything, you need to...
