superbuickguy's latest activity
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.shifter back in place. never liked the heater hose connected to the motor because it kinked due to the tight bend.... but, BBC have a... -
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.fuel connected, cooling mostly connected for reasons, the rearmost line is leaking.... I'll find out soon why that is.
-
superbuickguy replied to the thread The Wanderers build.belt on nose back on underside is pretty much done, so I need to move it off the lift to the middle of the shop to get on with wiring...
-
superbuickguy replied to the thread The Wanderers build.So I've been working on the Heep but there was a snow pile and, while the Heep doesn't run, the Blazer does
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.reinstalling a/c in a snowstorm got about a foot of snow in the last 12 or so hours.... glad I'm inside and this took way longer then...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.well, throwing parts at it, and getting there of course, there's missing parts - good thing I paid a lot of money for amateurs to work...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.time to reseal the t-case clean surfaces and reglue
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.push the motor back and hold it up with the engine cradle so I can get back on the lift about where it needs to be now the engine and...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.as no one trusts anyone on the internet with the trans attached. fun aside, leave the t-case off, loosen the core support and the...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.the rest of the story is this is the same flywheel that was loose.... So glad I didn't leave it with the shop that claimed the crank was...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.measured across the face of the flywheel - 0.011 deviation. well within spec.
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.it amazes me at times how little I can get accomplished at any one shop time installed the pressure plate this weekend I have help to...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.time to put it back together I have no idea why the shop took the accessories off they, of course, compounded the problem by only...
-
superbuickguy replied to the thread The Wanderers build.Other then having to replace the heater core (for the reasons of 1) get the rats nest out that's plugging the defrost vents, 2) to have...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.soon, goal is having it running again this Sunday. Today was spent trying to find the manuals sent with the motor....