superbuickguy's latest activity
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.Back to this... but first, repairs one of the wheels broke off (yay chinesium).... so welded new ones on much better and the motor is... -
superbuickguy replied to the thread The Wanderers build.Commentary about the stairs... they seem to have natural heights but it's hard to adjust so that it's solid feeling With that said, my...
-
superbuickguy replied to the thread The Wanderers build.problem 1 the cruise control arm lost its keeper key clipped problem 2 there is no way to keep the wire on the high idle solenoid with...
-
superbuickguy replied to the thread The Wanderers build.upcoming with the plow - the rams are both messed up, one is frozen, the other is bent from trying to move the other but on to other...
-
superbuickguy replied to the thread The Wanderers build.spent the last couple days on investigating this. To recap - not developing boost/limited boost. There are a quite a few things that can...
-
superbuickguy replied to the thread SAR JK r2.8 Cummins conversion.first step, center the Jeep on the rack and start laying out how this is going back together the wiring is an embarrassment - but I...
-
superbuickguy replied to the thread The Wanderers build.In today's fun. I had to run one more wire to get the plow to work. I did. It didn't. Thankfully there are more than a couple people...
-
superbuickguy replied to the thread The Wanderers build.a tail light didn't work... found the problem, someone used wire crimp connectors - and basically cut 2 of the wires in half and the...
-
superbuickguy replied to the thread The Wanderers build.It's funny, with the loss of being able to find mechanics to work on these motors, there is a great surge of YouTube videos .... this...
-
superbuickguy replied to the thread The Wanderers build.As Ford and GM used the same pump, this basic primer explains how a DB2 (mechanical) diesel injection pump works. For those following...
-
superbuickguy replied to the thread The Wanderers build.looks just like an old chevy doing old chevy things and yeah, I matched the paint lol did take a little more welding found the mounts...
-
superbuickguy replied to the thread The Wanderers build.so with just a slight notch it all can be installed after the notch, much alignment was done... this is probably fit number 5...
-
superbuickguy replied to the thread The Wanderers build.bracket lifted into place...don't like, not square and a bit low cut back brace off... don't think I'll need them but we'll see...
-
superbuickguy replied to the thread The Wanderers build.So, snow is supposed to be here Thursday. but first, the distributor arrived pull the old out but that wasn't the end of problems...
-
superbuickguy replied to the thread The Wanderers build.no but I'll certain borrow some of their ideas ;) in other, unrelated news, new plow truck. it looks far better then it is.... but...