Recent content by ZONE ZERO

A company called https://www.hardbody4x4.com/bravo.html makes a kit too but it’s a lot more involved. But you could do a series or a defender

She passed away from what I heard. I’m not into it but my kids love finding a duck on our jeep.

oh one more thing does anyone know where to get quality replacement LED lights for an arb bumper this. Is the 3d set in less than 3 years that have completely rotted out

Added some aux beam amber lights where the old hinges were attached they work well not sure how they will be for camp lights hopefully I’ll get 1 or 2 more trips in before snow flies

I remember that from talking to you and doing some measurements at the dealership, I actually have your hinges on my tailgate and love them. They should have come from jeep like that in the first place. you can do some pretty wild things with additive manufacturing you just can’t accomplish in...

do you know if the aux beam switch panel can have one switch set up to operate as a momentary switch?

Thanks, it means a lot . teaching myself fusion 360 and using poly cam was a huge undertaking. so all in not considering my time. the hatch cost around $ 8.50 to print total cost was just about $145.00 because for the tinted window. i need to find someone with a factory JK and JL so I can...

This might interest some of you too , this box is meant for a Jeep JL but was easily modified to work on my hard top with some flat stock aluminum, 4 bolts and a drill bit. The empty weight is around 40lbs it has a removable table attached to the face, and when the doors opened and down it acts...

Finished bike

This last part is the E-BIKE build. the big reason for this was I can’t pedal a bike anymore or for that matter go hiking due to an injury, so this gives me the opportunity to get out and enjoy myself with out having to deal with a motorcycle or dirt bike. I modled the tank/cubby after old...

I had a lot of trouble with the T channel around the corners. and the window bond needs to be cleaned off the glass. If anyone knows a good way to get the T-channel to lay flat on a bend I’d appreciate the insight.

Well it’s been about a year since I’ve posted up, but I have a bunch of progress on a few projects. The jeeps going in tomorrow for 4.88s and a rear locker. They are also going to look at the feasibility of removing the factory cage and moving everything up and out of the way to give the...

real quick the Dana 35 was stopped in I think 05 on the tj line of wranglers you probably have a Dana 30 front and a 44 rear that’s standard on jk and jl models unless it’s a rubicon then it comes with Dana 44s front and rear. All of these axles are fine with 35s. try An AEV PROCAL tuner it...

Im preparing this new set to mount to the current hard top. In one of the pictures I circled part of the tab you have to cut off and grind flush, the green tape indicates where to drill its double walled so I drill the outer hole larger to get a socket in then the inner hole the size of the bolt...

So I found most of this on amazon and adapted it to my factory hard top when I had it. ‘this is the rack https://a.co/d/56YG7kd hope the link works, if not this is the listing name. FURYENGRAVER Rear Window Storage Molle Panel Flank Kit Rear Window Protective Decoration for Jeep Wrangler...