Search results

Won this in a raffle at an off road rally yesterday. Wasn't really planning on ever mounting lights to my rig but since I've just won this 50 inch LED light bar worth $470 USD I'm now looking for ideas on how to mount this on my LR Expedition roof rack. Since the rack is curved I'm just not...

Well people, after a very long day I was able to install my Traxide D3-AU kit. Thanks for all the help and pointers. The first trouble was finding a suitable ground for the short green wire running from the USI-160 module since the wire is ridiculously short. I mounted in the same place as...

Thanks Jerdog53 and Unseenone, this will help. So the white buttons pop out eh? Who knew? I'll give it a go this Friday (taking the day Off) when I install the Traxide and make another attempt to run my power wires from under the dash to the rear. Need to get my fridge/freezer mounted between...

Okay, another question. How the heck do you get this channel cover to slide forward? When I ran my wires thru the firewall over the weekend I attempted to gain access to the wire harness trough by removing the B pillar lower trim, the sill trim, and even the trim piece on the outer edge of the...

Well, using a coat hanger like cmb6s mentioned I managed to get the wires thru the firewall and I have to say it was actually pretty easy. Only took me about 10-15 minutes. Pushed the wire from the engine side into the cabin, looked where the coat hanger poked thru, taped my wires onto the...

Thanks guys, this definitely helps. I also notice that the rubber grommet surrounding the huge bundle going into the cabin is quite pliable and would have room on the edge to run some wires thru. This would simplify things for me as that top grommet you speak of is in no-man-hands-land and isn't...

Is it the small unused grommet that is to the upper left of the huge bundle going in? If so, that is basically NOT accessible from the engine side and from the inside it is not visible. Pictures people, pictures!!!!

Where EXACTLY did you run the wires thru the firewall, there is some elusive hole there apparently that nobody but a select few can access. I see the main bundle of wires (size of a garden hose or so) and one or two others that are being used and look pretty sealed. It's not possible from you...

Doing the happy dance, my ARB fridge/freezer arrived today!!!:jumping: Shipped Monday, arrived today (Thursday) from NJ to MN. Great service! Thanks OK4WD!!!

I just ordered my ARB 50qt from them. They now have 5 left in stock. I've shopped around, even asked someone who gets discounts from ARB and he couldn't touch this deal. I'll post again once I receive it next week.

Here we are in February now and still waiting to hear the full story about the tree and the window.

Sure, I don't have any problems with that. FYI: It was taken in Moab at the 2014 Rover Rally on Poison Spider Mesa.

Looks like all you need after getting your RS sliders back on is a Tactical Rovers (T4x4) gas tank skid. Seems like your transfer case skid should sit right on top of the RS sliders once you put them back in place as they go right to the inside edge of the frame. It might push the skid down a...

The Terrafirma front skid plate, along with T4x4 rock sliders would be a great start. I've got the T4x4 gas tank skid plate and it's more than paid for itself going over rocks. With this amount of coverage you're nearly bullet proof. I also have the Asfir rear diff guard which helps a lot too...

When I mounted my skid plate I remember having to use a bottle jack to help push it up against the bottom of the truck so I could start the bolt threads. I was doing this all alone with no outside help. Since then I've never had a reason to pull it off for anything, however, the guys at my shop...

The Terrafirma doesn't cover the tranny however, it covers so much area that when I looked at what it would take for an object, Rock, etc, to make impact, it's so far up high that it's really out of reach. Unless you drive with reckless abandon or have a horrible spotter you should be fine in...

NO idea but hope to find out some day (maybe later this year).

Take a look at the Terrafirma skid plate. Covers more area than all the others. Why settle for an over priced, puny Mantec plate when you can have this for less?

If you have a Disco3/LR3 then there are only two clear choices for diagnostic tools. 1) Nanocom - by Black Box Solutions, or 2) GAP IID tool. Do some research and you'll quickly see that these are the two standouts around the world.

Yes, I got it from Lucky8