Search results

The axle housing has moved on to a new owner. I still have the 3rd member for sale. The specs are as follows: - ~94k miles - 4.10 gears - non-elocker - From a 2000 4Runner sport 5spd Does anybody know if these are a useful swap into other trucks? Or have any suggestions for a good place to...

I'm going to be moving and need to clean out the garage. This 3rd member came out of my 2000 4Runner 4x4 5spd and is excellent condition. It has about 95k on it and is not the e-locker. I only removed it because I swapped in a different type of differential. Price: Asking $250, but no...

If you decide to split these up I'd be interested in one to use as a spare tire. - Matt

I had a 96 ZJ for about 6 years before my 4Runner. The ZJ was running 33" tires and with some trimming, a small lift, and the V8 it was great on the trail. Otherwise the truck had a lot of negatives, bad gas mileage, spare tire located in the trunk, vague steering, unibody, etc. The biggest...

I used 1/2" birch plywood from OSH and it has held up great over the last two years. The joints are all rabbit joints with glue and brads. http://www.blankwhitepage.com/gallery/t4r_drawer - Matt

The PIAAs have sold.

The winch cover, elocker switch, and shift knob have all sold. I'd really like to sell the lights and the warn mounting plate, open to offers. - Matt

No more weird "fanged" W hole in the bumper. Details in this post. http://www.expeditionportal.com/forum/threads/21472-2000-4runner-Sport-Build?p=1188445#post1188445 - Matt

I cleaned up the PIAAs and they are in good shape, the only problem is that one of the bulbs is burned out. Because of this I'm lowering the price to $95. It's a standard H3 lamp so it shouldn't be a problem to replace. I'd really like to get these out of the garage before I succumb to the...

Today I got around to installing a WARN m8000 in my ARB Prado bumper. I still need to buy some synthetic rope and a fairlead, but otherwise it is ready to go. The solenoid pack is mounted in the "W" cutout in the front of the bumper. The total added weight is a little under 50lbs. I sleeved the...

The elocker ECU, snatch block, and winch cable have all sold. Help me get the rest of this out of my garage. :) - Matt

All parts are in the San Francisco Bay Area. == 3rd member from a 2000 Toyota 4Runner w/ 4.10 gears == == WARN winch mounting plate w/ roller fairlead for 97-06 Jeep Wrangler (TJ) - SOLD == == 6" PIAA driving lights - SOLD == == Toyota elocker switch - SOLD == == TRD shift knob - SOLD == ==...

I helped a friend mount a Puma on a 1st gen Xterra. We mounted the compressor under the rear bumper, the tank between the rails, and the pressure switch and adjustor inside the engine bay. From what I remember we used 4 awg for the power wires and it has held up fine during ~5 years of use. The...

I built my drawer out of 1/2" cabinet grade plywood and used 1/8" rabbit joints with yellow wood glue and nails. The nails are not structural, they just held things in place while the glue dried. These joints have held up great even when "abused" over long stretches of washboard road...

Here are a few from this weekend. - Matt

+1 for the NOCO Genius. I bought a G1100 for use with a 28ah AGM battery and it is working well. - Matt

1999 SR5 4WD in "expo" white. 121k. Manual transmission, moonroof, gray leather interior. $9981 http://sfbay.craigslist.org/eby/ctd/3084110408.html

It looked like the sky was on fire over the Bay Area a few days ago, - Matt

Hi Mike, I think we're going to hit that trail two Sunday's from now on the way back from Tahoe, but if you guys end up going another time let me know. - Matt

Nice writeup. Approximately how long of a drive is it from highway 80 to the top of the mountain? We are heading up to Tahoe in a few weeks and I might try to find time to fit this trail into the schedule. Is it clearly marked from the Eagle Nest exit? - Matt