Search results

I just sold the EXP, so keeping the TN.

Your fuel fill looks good. But, you need to bend the bracket about 15 degrees down or you'll still get dribbles. If you want to see that front bumper in action, it was featured on one of the 'Fast N Furious' shows.

+2 on Buckstop. In aluminum it just about saves the weight of the winch (with synth). I had an M16000 in one. But, all I use now is the Horror Fright 12k for about 1/6 the cost and maybe better reliability.

You didn't replace both front hub bearings?

Walk through video from EC.

Bump for reduced price. We need to sell one of these Earth Cruisers. I like the EXP and the Terra Nova equally. I'd sell the Terra Nova for $325k. It's equally fully loaded RAM 3500/Cummins.

2017 FUSO FG, I'm 6' 3" with long legs and arms. This has custom Earth Cruiser seats that are a little tall. I have to duck a little to look up and out the windows, probably due to the seat thickness. The most noticable is the steering wheel is low and forward. You kinda have to huddle over...

Our Earth Cruiser EXP in the wild's of Oregon. In the For Sale forum. https://forum.expeditionportal.com/threads/2018-earth-cruiser-exp-price-reduced.233617/

So, what's different now verses the last 40 years. There was a much larger uptic from covid and now a larger down tic. Otherwise, same old down turn in RV sales, just like 2007-8. Seems like a 6-7 year cycle of RV feast/famine. Same old huge depreciation the first 5 seconds you leave the...

These are Alcan leaf springs for a 2019-up, Ram 3500 Cab n Chassis with a 6000-6500 axle weight. $900 in Corvallis, OR. Local install available for $300. Get a much better ride by removing the stock overload springs and installing ones for your exact weight. Overload springs are intended for...

This EXP is still available. I've got it back from Earth Cruiser, so it's in Corvallis Oregon area. Price reduced. Willing to deal.

Local tire shops will not sipe used tires. They'll do new ones that you buy from them. Probably don't like hitting rocks with their tools. I've siped my own motorcycle tires using a hack saw with the blade ground to a knife edge. Didn't take long. You can do custom shapes. Usually, there...

I'm shopping for rear leafs for my 2023 3500 RAM C&C. My specs will be very close to yours. Where did you get them? I"m guessing Deaver. Part no. or other help on spec'ing them?

Took delivery on the Terranova and the EXP is still available at Earth Cruiser. See the Video on the u-tube. Going to miss it. The EXP is just fun to drive.

Since this is the motorcycle section I assume you have mounts for KTM's?

These are great bikes that can easily go to 120,000 miles. (Interested in the FMF's if you separate it)

You pretty much need to send KTM your racing resume to get one.

These are great wheels to transform your Adventure bike into a 'Canyon Carver'. It will feel like a Super Motard. 10 minute swap over because it has everything. TCK70 tires, radial 110-19, 150-17. Rear is new, front has some wear. All floating disk brakes. All tone rings for the ABS (front...

For a RAM 2500, 2014-up, Carli part no. CS-DMRC-14-R1 . Rear soft coil springs, 1500 loads, 1/2-1" lift. These springs rode great until I added more weight. I went to the R2 springs. Check with Carli or C&J for your app. In Corvallis, OR for local pickup. Price is half of new at $240...

There is also a pre and post sensor on the CAT that senses the exhaust. Your water injection would trigger a post-CAT event.