Search results

I plan on using this idea with short connections on my inverter installation. The maker of these used 1/4"x3/4" copper flat bar which he claims gives a cross-sectional area about 12% greater than 4/0 wire. You'd have to do the math to figure out what size flat bar would equal #2 wire.

I agree with pappawheely on centramatics making a difference. Mine are mounted behind Michelin XDS2 245/70/19.5 tires. The ride is not perfect but way better than not having them at all. I found an article talking about the bastard tire on another forum. Apparently, there's more to mounting a...

Pugslyyy, I remember reading a thread where you mentioned that you have separate systems but didn't go into too much detail about it. Do you normally have the switch in the off position? Do you prefer them to be separate or combined? Does the starter battery + go to position 1 stud and house...

Thanks DiploStrat for chiming in. I was afraid that I would have to figure this out on my own. In your thread "Dissimilar Batteries", you mentioned that you'd want an isolated/parallel system. That's what got me thinking that I should do the same. Another reason for me wanting to separate the...

Hey Portal members, I'm finally coming out of the closet and posting. I've just spent the last few days going over all the threads in this section that have to do with dual batteries, inverters, solar and alternators. Lots of great information which is how I came up with a wiring diagram for...