Search results

you can hear the compressor in its sound proof box cruising down the freeway at 70 MPH with the radio on and the kids screaming in the back?

Theres a Land Rover/ Range Rover plug n play version on their website now

Turn off DSC when you're doing this maneuver. Its the button above your radio. If you're doing the maneuver fast as in turning a corner most likely its ABS being applied to equalize wheel speed. If it doesn't occur when you have DSC off then you have your answer. Do you have larger tires as...

100%. I think thats one of the reasons for sure. Ours was just old and the piston ring had worn down. Leading up to that failure it would be nice to know when your compressor had started overworking and at least prepare for it or address it.

Check it out. Simple system to let you know when your compressor is on. If its on while you're driving especially for extended periods you know you may have a problem

Here’s what it looks like. Sent from my iPhone using Tapatalk

Haha. Who needs bearings anyway? Actually took off the 295’s that were on there and went down to 285’s Sent from my iPhone using Tapatalk

Maybe the first of its kind with Method 305 NV 17” rims on a V8 with factory rotors and calipers Sent from my iPhone using Tapatalk

This would mostly depend on the offset of the wheels but if you're running factory 5x120 you will always be limited to the available rims made to that spec. I haven't seen many of the big wheel manufacturers like KMC, Method, Fuel etc making a 5x120. A BMW or Honda would fit no problem since a...

Here’s the link to my video to get it done Sent from my iPhone using Tapatalk

I have a V8. I’ll be posting a video on my YouTube channels. Search my username on YouTube. I’ll have it up in the next couple of days. Sent from my iPhone using Tapatalk

this is incorrect. I just recently put 17" rims on my 07 LR3 HSE. I will be posting a video on this. No brake change necessary

Haha. Funny. Sent from my iPhone using Tapatalk

agree but we only use the Johnson Rods as a temporary lift. This was done on mine to see approximately what was required to fit on 34" tires. My GF is running 33's on hers but we have SYA spacers on top of her Arnotts so they dont stress the bags too much on extended height. This is the more...

Hey folks. I did a video that explains exactly what I did to achieve a lift using the above method and no it doesn't mean just adjusting calibrations with a GAP tool. I would not suggest this method unless you completely understand the EAS AND have a GAP tool or similar that can adjust EAS...

I'm running 34's on mine and my GF is running 33's on hers.

I know this will probably rub a few the wrong way but we have mounted Jeep Bumpers on both my girlfriends LR as well as mine. Why would anyone do this? Let me lay out our reasons. 1. trying to save all the money we can for mechanical issues that are guaranteed to come up. 2. dont want to look...

we have built bypass valves to fill shocks manually in case any part of the system fails. We also run Arnotts that have a check valve that will hold up to 75 psi of air so in theory you should never be on bumpstops unless a severe compression blows out what air is in the shock. Of course if...

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk