Search results

Currently no blocks, they're definitely an option. Not a huge fan of blocks either but may be the best option. I'll see how much the expansion leaf pack AAL adds to height, if I still want a bit more I could even go with a 1" block which I assum would have pretty minimal effect on driveability.

Thanks for the feedback, to clarify, I'm looking for a lift in the rear to match the front lift. I'm not wanting a lift to compensate for load/squat. With a 3100kg GVWR and 1250kg payload rating the springs are not in danger of being overloaded yet, more looking for the most effective way to...

Lesst than 30 minutes left, someone is going to score an awesome unit!!

Posting for a fellow JDM Toyota fire truck owner. He's selling his beautiful adventure rig. It was just featured in Four Wheeler Magazine! Here's the link to the auction: https://bringatrailer.com/listing/1992-toyota-hiace-firetruck/ DM me if you would like more info or his contact info.

It has been a while since I have updated things. Work on the truck has been slow but steady. Just installed new heavy duty torsion bars on the front which allows me to crank the torsion bars for a little more lift and will help control the weight as well. Going to be replacing all of the...

Hi all, hoping for some feedback from those who may have tried or know about the effects of flipped shackles and how they handle the weight of a camper, especially when it comes to moderate/aggressive off-roading. The Toyota truck in question is an unusual beast, it's a JDM Toyota Dyna: The...

SOLD!

Unit is still for sale! Truck is not 4x4 Truck is an 8’ box.

Red Deer!

***SOLD*** Reluctantly selling our trusty family camping rig. Both the truck and camper were purchased brand new by my grandfather. Both are in excellent condition and meticulously maintained. The truck is a 1984 Ford F250 Super Cab with only 53,900 km on it. It has the 351 V8 5.8L engine and...

I actually live in Alberta. I used Zen Autoworks out of Calgary, zenautoworks.ca Highly recommend them! Sent you a PM as well. [emoji4]

So turns out that you can’t test for a Torsen lsd differential by raising the wheels and turning them as there has to be power applied to the driveshaft in order for the lsd to engage. It will act like an open differential when just turning the wheels. Other than taking the differential apart...

Yeah, only thing I can think is the internals may be the same? From the forum posts, it sounds like the Supra differential is also an 8” LSD with a 5:1 ratio which I’d be pretty happy about! I have noticed that the truck drives very well when when not in 4WD but chalked it up to the weight on...

Yeah, I’m confused, the pictures I found of the Supra differentials look nothing like the truck. It’s definitely a solid rear axle and not Independent. Front is IFS Looked up the part diagrams and a LSD option is listed: Still don’t know how to tell which differential I have though, I guess I...

The wheelbase is 232cm and the track width with my current 3rd gen 4Runner wheels and 245/75R16 tires is 169cm Ok, so the Trans/Axle code is listed as: R351F B03B Does that mean anything to you? Edit: Did some googling, looks like an ASIN transmission and seems that the differential is...

Got my new summer/adventure shoes on today. Hoping road trips are still going to be possible this summer! [emoji51]

Yes, truck cabin on 1.25t truck chassis. I’ll check on the rear axle, not sure actually.

Nice! I’m west of Cochrane! I’ll check on the wheel base and track width and let you know!

Not sure what you mean by easily removed? Like lights, etc? Lights were easy to remove, these trucks were retrofitted as fire trucks so most everything can be ‘undone’. I had a big rack and pump platform on the back of mine, cut all of the racks, off and basically returned the box to a...

With spring around the corner I have been trying to get going with work on the truck again. Finally got around to installing a 1/2” body lift to eliminate rubbing on the front tires. I made bushings out of UHMWPE and ended up having to buy longer bolts as well. The OE bolts are class 8 but...