I used a Plano Moulding All Weather case...
I went with a Plano rifle case. I found this at Wal-Mart for under $80 IIRC. My rationale for putting it on the roof rack is to have easy access to my recovery gear. I have since removed this and went with some newer Rigid cases from Home Depot. They...
My LEDs are mounted on...
I have two places where my bars are mounted. The fairing on the roof rack and in between the hoop of my Expedition One bumper...
.
.
.
I have noticed a definitive howl when my light bar above is misaligned, but I have not had any issues since I adjusted it. There is...
Couple of things you might want to consider...
What is your payload going to be? If it is going to be a constant load, I would recommend that you upgrade from the add-a-leaf to another set of springs. Initially, I bought a Toytec Ultimate lift kit with the add-a-leaf (instead of the 1" block)...
So you are the owner of the trailer being built...
I visited VMI in May, and I got a chance to look at the shop and the goodies that they had available. I got a chance to see your frame as it was being constructed. CONGRATULATIONS! I am going to upgrade my Sherpa II for one of these. Looking...
Yes, I did find a solution to the problem. Looks like I'm going in a different direction with my trailer - I'm putting it up for sale soon. I do recommend that you call adapter kings for the hub conversion. My understanding is that the hubs are going to be two pieces due to the stud locations...
Wilson 4G booster...
I have one in my rig, and I have used it for quite some time. It does increase the signal by a significant amount. I actually bought a Verizon mifi jetpack, and it works like a charm. Now, I can use the mobile mifi or slip my cell phone in the booster cradle. Works great...
Tundra is a great platform...
D45,
.
I have a 2011 Tundra Crew Max, and I think this is a great platform to build upon. I started with a grade model and built it up myself. I don't have any buyer's remorse on this decision. Toyota reliability, plenty of room and a bomber engine...It has been a...
I have a fail safe solution...
I made a goal to not look at other bikes until I ride as many miles on it as I paid for it. I have 3 bikes - '99 Cannondale Jekyll, '09 Tricross and a 2012 Roubaix...That last Roubaix is gonna take awhile:coffee:
Regards,
BWJ
You, Sir, are spot on...
Cwvandy,
.
OK ~ thank you for your reply and kind words. Let's see now, Hinton Industries, Icon, Expedition One...Great minds think alike...:ylsmoke:
.
Regards,
.
BWJ
Noice!
Cwvandy,
.
Welcome to the EXO1 family. I have been following your thread since it was first posted. I am the guy that has the one-off tire carrier from EXO1, I had to wait 18 months for them to design & build it...I'm glad that yours turned out well ~ it looks like a great design from...
.
Ohana,
.
Likewise! Gonna miss the Hawaiian pie this year at the Thanksgiving dinner...Regards, to you and your family! Gonna PM you about the Transfer flow tank...
.
.
Thank you!
.
Regards,
.
BWJ
Daystar, ARB and ICON...
All,
.
Sorry I have not had a chance to update my rig for awhile...I have been busy with Royals postseason baseball and life in general. Anyways, here are some updates on my rig.
.
Daystar airbag cradles - I was concerned that the lift that I had was a little too tall...
Been there, done that...
Indhark,
I had a '98 4runner as a daily driver for several years (V6, automatic). The 4runner is a great platform to build upon, however, there are some things that you have to consider. My build consisted of several 'heavy duty' pieces that if I had to do over...
Amo292,
Thanks for your review. There is something to be said about driving a vehicle that is built and not bought. My 2011 Tundra was a grade package with some extras from the factory. I did not want to pay for an extra package only to replace it sooner than later. The TRD pro package is...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.