I made an ammo can LP fire box on the cheap that works great. Had to strip / burn off the paint. Nice to have in Cali when the summers won't allow wood fires.
For wood fires I like to use a "Pop up Pit" it's really light weight and folds up like a camp chair. 24' X 24 size. I can pick it up and...
I use a 5lb tank in my rig for cooking, never had a problem. I do turn it off when not using it and I use an LP / CO detector. I think the hype is likely overrated due to RV DOT Regulations, I mean it's just as much risk having an appliance and LP plumbing going into it inside the vehicle as...
I have C rated 31.5 tires and was aired down to 25. It was just to rough to tame with any setup probably. Maybe a trophy truck could get over 20mph w/o drama lol
I just did Death Valley a few weeks ago and took Steele Pass from the Dunes, then up Lippencott, then Hunter Pass, it was fine but like mentioned the Washboard at the top and bottom of Lippencott is more brutal than I've seen out there and I actually broke an OME rear shock eye clean off. I was...
I totally agree with most of your cleanup methods and generally never use soap either. I use a scrapper / squeegee thing for backpacking and regular sanitizing surface wipes if need be then I use those expanding coin size paper towels that puff up with a couple tablespoons of agua.
I also do ADV...
That's very cool, from what I've researched the issue with mine and many other CDH designs is that if you use the built in thermostat, the heater will just kick down to the low setting but keep running which supposedly is a very in efficient way to run and also contributes to a lot of soot build...
I went down the CDH rabbit hole looking for a way to find a thermostat control setting and found this product that a lot of people are using to have a thermostat function https://bureck.company.site/
This leads me to believe that mine doesn't have one built in I suppose. Your CDH must be a more...
That magnetic light in your hatch looks pretty cool, You can probably stick it anywhere you want to the outside of your truck too or wherever there's steel
Yeah what he said ^^ lol
FWIW My side hatch is still totally usable since the wedge is attached to the inner camper hatch frame with some simple velcro pieces and functions the same with or without the wedge. You can get it to seal tighter if needed by using a bungee to pull it tighter by...
Mine is pretty much just like yours but with hinges to fold the upright pieces flat. I used some weather stripping to seal up most of the gaps but I may add some more. I use velcro to keep the uprights from flopping down. BTW you should point that exhaust downwards so condensation doesn't build...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.