Search results

Nah, the lids do not flex there when closing. Look at the image sequence on how to close these units I posted the link to a few posts back. However one could push that front arch in at that point if one tried to push down on that point. If the user does not follow the proper stowing steps for...

Could be. We'll get to the bottom of what caused the problem. In learning how to properly collapse these tents I've not experience any issues like this, ever, and I deploy and collapse grand raids at least once a day. Any fiberglass production item can have issues.

What did they tell you as far as warranty repair? Never mind I am reading the post on your experience.

I am so sorry to hear that. Honestly this hook situation caught everyone off guard. We had the same thing happen to us. 2 in a row. Ill bet we both had this happen at the same time. The best way to resolve the issue at this time is have them send you a replacement set of hooks, not a ladder...

This looks like an object was inside the tent that was taller than the interior closed space when closed. But one never knows. Was this tent purchased in the USA? I posted the de-facto closing procedure for these tents...

A few ladders got out with these defective hooks. The hook supplier delivered a batch of defective hooks to James Baroud. This is a molding issue. If you purchased a JB tent in December 2014 you may received hooks from that batch. Please contact the dealer you purchased from and they will send...

The second fridge isn't just for ice but also all drinks and some meats like salmon or steaks where you want to keep it just above freezing for optimal storage times. A second unit allows for quite a bit more perishable storage if you need to go out for longer periods. And having ice for...

Goal Zero Yeti 400 is a 33Ah Deep Cycle Battery as well as 110V Inverter and USB plus 12V supply. Then we stack an Odyssey 75Ah battery underneath that and wire in Parallel for a total of 110 Ah reserve. ARB Single Cylinder Compressor is great for airing up tires. I use it regularly. It's not...

North Carolina is currently handled by OK Four-Wheel Drive and Tire in Stewartsville New Jersey. OK Four Wheel Drive and Tire 2621 New Jersey 57, Stewartsville, NJ 08886 Phone:(908) 454-6973

We no longer install sub-systems at the factory except for special needs situations, however the dealer in your area would handle it no problem.

Yes. every single sub-system and accessory for XV-2 are provisioned for on XV1. It is the exact same Chassis and Cargo Bed between the two models. You can build XV-1 into an XV-2 at your own pace. The only special tool required is for the Water System install. A PEX Expansion Tool is required to...

Pictures look great. But just to be clear, the center compartment was indeed sized for Jerry Cans. However we do not endorse or recommend that fuel is stored in that space under any circumstances. Use it for an additional 10 gallons of water or dry-goods and cooking utensils. DO NOT store fuel...

Yes indeed. Just ensure your 7 Pin Receptacle is not just an adapter from a 4-Pin. Also important is you must have a Brake Controller installed. Unless you are crazy of course:)

The rack or entire rack system is easily removable. Rack assist kit is not ready yet, but if you set everything up right you really won't need it.

The chassis we use for XVENTURE XV-1 and XV-2 trailers was engineered for the the militaries Humvee Primary Tow Vehicle which has a max towing capacity of 4200lbs. Due to our superior construction techniques, this chassis is the only light tactical trailer chassis available to the civilian...

It's 125 lbs on a lever that is traveling 65-80 MPH on highway and being thrown left to right off road. Those forces change that 125 pounder into a completely different animal when braking at speed. Don't lose sight of that. Anyway, just trying to help. Sounds like you have it figured out.

Trust me, those weld at the top of the cargo bed securing the elevator tube to it are going to crack in a jiffy with only a tent on the rack at the lowest position. I'd make a strap that you can bolt through the shoulder of the bed. Same with the base of those tubes. Use hardened bolts and good...

Thanks for the compliments. So the next consideration is that after you lift or lower the rack, and have provisioned for the changing elevator spread, you'll need to be able to lock the slides at all 4 points from being able to move forward or back when in transport. Otherwise the rack will not...

You definitely need the ability for each vertical to tray attachment point to pivot, and you are on the right track there. However with an elevating rack system when the rack is level, you have a distance between the front and rear set of vertical support beams. When you lift one end of the rack...

Hi TwinStick, thank you for your inquiry. -You can use most any Lug Pattern you want on XVENTURE. The only lug pattern we charge extra for are the 8 Lug patterns. These are $100 each extra. - Our stock Chassis/Axle combo provides full travel clearance for up to 42" tire. - XV-2 comes with 6...