Search results

Man that really sucks! I thought that would happen with them separated like that but I was hoping for your sake it wouldn't

"It" is what I meant

This guy also was selling a 70 series about a year ago

I would put it back on the frame asap! You'll be surprised how easily IG contorts. When putting my tub back on the frame it was pretty hard and that was before doing any modifications to the tub at all. Once I finished all my mods I will pull It again and paint

Cool trailer by the way! How Much did you pick it up for? Sent from my Nexus 4

Ahhh it appears you have a bantam trailer not a 416. The bantam tubs are not removable as far as I know. The 416 can be completely disassembled. So in that case youll probably just have yo flip the whole upside down to work on the bottom. Sent from my Nexus 4

Since you made you tailgate so wide I don't really have any suggestions on where to mount the struts. If the tailgate was a little smaller the typical place is the mount it on the rear onto whatever side of the tailgate you plan on mounting the hinges for the lid. With enough strength (in the...

So I have a pretty big update that will help out alot of people with these old beat up m416 tubs, now I know most of you have tried to straighten the tub sides out by using angle iron but all that is really accomplishing is Covering over the bent side. So my solution is first go to harbor...

Yeah its actually quite easy, first I would saturate all the bolts with PB blaster and let it sit overnight. Now if you have air tools that will help out a ton to remove the rusted nuts off, the only part that I found was difficult was the special zerk bolts that hold the springs in. I...

Where did you get the connectors for the wire rope? Sent from my Nexus 4

i wanted to reach out and see what you guys think of these stabilizer jackes. my frame sits at 30 off the ground and ive ben trying to find a good solution and i think these would be perfect. once i set up can i can just whip them out and put them in the rear of the trailer the stabilze. i...

1" square tubing .120 wall costs $1.50 a foot from my local metal supplier. I custom ordered c channel and it cost me $4.57 a foot Sent from my Nexus 4

For nerf bars and fenders my original plan was too connect them but when I visiting sierra 4x4 to pick up my lid I saw a design with the same fenders and round tube Nerf bars and they weren't connected and it looked awesome so I decided to go that route. So instead of it looking like some long...

today i took the day off and spent most of it in the garage working on my nerf bars. i was able to knock out one side completely and ill continue on the other side and the top rail tomorrow. it was a ver fulfilling day and im very satisfied how they turned out

it sure does!!!

Today I covered a lot of ground with my trailer Now that my 4runner is getting some Fab work down at a buddys shop I didn't have that as a distraction. I did some dent removal and then I just couldn't help but start on my tailgate mod. Everything is just tacked now and I still want to add a few...

One thing I've been trying to wrap my head around is are you planning on charging your battery thru the trailer harness or are planning on doing it thru a desperate 4 gauge wire that you will disconnect along with the trailer harness? Sent from my Nexus 4

Thanks, you have the link? Sent from my Nexus 4

For the tailgate, are you planning on putting some sheet metal on the exterior to box it in and to clean up the look of the gate? Sent from my Nexus 4

Beautiful job so far!! Love how you did the tailgate and I look forward to seeing how you will incorporate the locking pins Sent from my Nexus 4