Search results

Do you have your interior waterproofed somehow? After watching the river crossing minus the bridge I'd hope so. :Wow1: Really digging the intergrated bullbar, fender protectors, sliders. Love the saying too; "Live your dreams...Quit your job"

Sorry Nikson, I meant the canopy/awning. My bad... :oops:

Hey Nikson, is that a 79" model on your XJ? Jake, I would want the RTT as centered as possible, maybe even closer to the front, on your rack. Just toss on a fairing in front of the RTT and run it. Have the tent fold out to the passengers side, which will also allow easy, or easier, access to...

When I replaced the plugs on my 00 XJ, they too were all gapped right around .085". Amazing that it ran at all... Quicker start-ups and idling when they're all gapped at .035". If you haven't done so, make sure you use ample amount of neverseize on the 4 bolts that hold the rail in, for future...

2WD or 4WD, either way, I bet it got regeared to assist in hauling the extra weight around. I'd rock it

Make sure your cooling system is up to par. Maybe run dual electric fans and get rid of the mechanical clutch fan. Maybe add an extra tranny cooler if you don't already have one. More fluid is always better. You can use a ZJ gas tank skid for your XJ. Remember all this extra armor increases...

It's going to be hard to break a d35 w/hardened shafts (the way he wheels it anyways). Plus a locker? Why not? :sombrero:

I run 4.56's in my auto-driven, 4.0L powered 00 XJ, rolling on 33x10.5 KM2's (on stock steelies). Tach reads roughly 2K @ 60 mph. I love the power-on-demand and is capable of crawling moderate terrain in just 4HI. Eventually you'll want to look into longer brake hoses too. I'm slowly building...

Hey Connor! Better get that rig ready for some extreme overlanding this summer!!

Nice Truck! Did you make/fab the exo yourself? I gotta find another truck like that, I had a spacecab and would LOVE to have another one!

Those are custom too Barrows ;) Here's another one:

Toyota, GM, Isuzu, Nissan and even FSJ (Full-Size Jeep) share the same bolt pattern, 6x5.5

Here's a few of mine. 1993 Rodeo signed by Rick Pewe last fall at Rocky Mountain Terrain Park in Carthage, Me. (www.rmtp.us) Engine/Exhaust: 3.2L V6, 5 speed transmission, 2 speed transfer case Chevrolet Lumina Z34 hood vents Optima Yellowtop with 98 Rodeo alt upgrade Clutch fan removal/dual...

I drive a 93 Rodeo. 5 speed, 3.2L V6, t-bar crank, Superwinch manual hubs, Aussie'd D44 rear. 4.30's, ZR2 single leaf swap and a shorty AAL from Indy4x. I also fabricated 3" longer shackles for the rear netting 1.5" lift with just those. Dynomax muffler. XCR8 winch and cover mounted on a...

Great to see more Isuzu's out there! I've been wheeling Rodeo's for over 8 years now. My current set-up is a 93, Aussie'd D44 rear, 4.30's, XCR8 winch on a custom mounted Defender Series bumper that I fabbed on. Currently running on 33x12.5x15 Pro Comp MT's on some Outlaw II rims. These ARE...