Search results

Was at a car show. Sure was nice.

Saw this today and thought I might share these photos. Truck was dry and clean. Enjoy.

Not into production. Have built a couple and have been using one. We are almost done getting things right.

I built it. Thought I would build these for others but have put those plans on hold until I get it right.

Mounted the flat bed direct to the new isolation mounts. Then set the camper on the flatbed.

I see you have added a stabilizing gusset as well. I like that.

I see your jacks are mounted to plates much lower than mine. Did you add the lower mount plate on jacks? I like this and would provide a more stable lift.

Yes they are electric jacks. They are Rieco units. They easily lift the entire camper. I have the set up that has a controller with remote that enables all the jacks to lift simultaneously. I have the jacks mounted to 3/8" plates that secure to a stout aluminum angle that secures right into...

Had a set of mounts made. The lower sections bolt on to the frame and will mate with flatbed through the use of spring isolators. Have also installed a receiver hitch. This integrates with the rear flatbed/body mount.

Built a flatbed on my Ram 5500 diesel and decided to change to a gas truck to gain reliability. Found the flatbed is really nice for truck being a camper and a truck, but not so great for height. Building a 3" tall quick mount "swiss knife" type of sub frame that will allow camper to ride 3"...