Search results

A big pile of parts arrived today for the Propex setup and I spent 90 minutes down town collecting little bits and pieces. Here are most of them. This is not a cheap project (nothing about Propex heat is cheap): A test fit of all the regulator parts. I added two 1/4 inch bulkhead fittings (one...

You bet!

Welcome. Ask and ye shall receive! Here are some pics. I measured it carefully, and it's actually 7 3/16 from the outside edge. First I made a square mark from the inmost edge: And then measured from the outside of the rack: 7 3/16. As for the table, I have the largest FR table. It was...

I have this setup. When installed the rear Alucab bracket reaches 7 1/4 inch inward when measured from the outside of the rack profile.

Cool setup. I have a Globe Trotter on a trailer. Would love to put one on my Jeep, but my vestibule isn't long enough. When you bought your vestibule, did you special order it at a longer length? I may be interested, but would need to know the difference from the bottom of the tent to the ground...

Says they are rated for 1200 psi max. My 20 lbs. propane tank should be well under 400 psi in front of the regulators. Do they have different flavors of brass? Just about every propane setup I've seen uses brass of some sort. Maybe someone that knows about propane could speak up before I blow...

Now that I know what to Google, I found a 5-pack of very similar bulkhead connectors here. Come out to $6.80 each shipped.

Awesome find with the bulkhead fitting. I've been looking for one to use in a propane project. Thanks for posting it!

Started working on the Propex today. These are the Webasto bulkhead connectors. I drilled new 2.5 inch holes to mount them. This is the "snap fitting" that will make connecting the ducts easy, requiring no clamps or internal access to the box. These things are really, really tight and I...

Bummer....if I wasn't poofreading my post I would have beat ya! :censored:

I'd be interested. What is the min/max height from the center of the mounting plate? Prolly should make sure it will work for my trailer first.

I have an '86 Quadravan that I bought about a year ago. Was going to turn it into a dedicated camping rig, but that's been put on hold for a bit. I think I got lucky. The last owner had it for 12 years and provided all the maintenance records and receipts since the 60K mile mark (one or two...

They also make a small shower awning similar to the Quick Pitch En-Suite. Might be kinda cool to have a matching set. I hear the Alu Cab is releasing a shower awning soon that will match the Shadow Awning though, so I'm waiting to see what that looks like before committing to any of them.

Well...I dunno if it's "straight up unreliable"...but my testing matches MattJs'. The Propex seems to work when it wants to. My theory is that a Propex that is setup as a portable unit just has too many variables to be reliable. On different trips I've blocked the combustion outlet, had propane...

So, it's that time of year again. I set up my Eezi-Awn Globetrotter in the driveway yesterday and used a larger Buddy Heater to heat it before bedtime. I was curious about the carbon monoxide levels that the Buddy Heater might produce. To check the levels I used a SensorCon that I always keep in...

Withdrawn. Can’t bring myself to part with it.

Do some searching for “ultralight backpacking tent”. Most ultralight gear is modular. Now, this is just a tent, but the internal bug tent is a separate piece. You can pitch the screen, or the tent, or both together. They make the screen with a floor and without a floor. It's really expensive...

Hmmm. That looks really interesting. Assuming that the blade sheath is sealed...that might solve the leaky bar-oil problem. I'm not sure if I'd have room to mount it in the Jeep and still have enough room to draw it out.

Front Runner makes one for snowboards/fishing poles. It's flat on the back and will bolt and/or screw to anything. I have had one sitting around for a couple of years and am finally going to use it for storing an extendable ladder. It locks too.

I take it that this is the 14 - 18 inch bag? If so, would you be willing to roughly give the max size of objects for each pocket in inches (when a bar is behind them)? I know it's PITA request, but I'd name my firstborn after ya. ?