Search results

No sorry should have explained better ,for the camper itself .Instead of the crank up corner jacks

I am building my truck camper and was wondering if anyone has ever made a electric lifting system from 12v trailer jacks that want to share any info?

Finished with the plywood on the exterior and getting ready for putting on the exterior not quite done sanding .I rounded off the corners for a cleaner look . I will post some pictures after I do the first coating ,decide on using Raptor Box spray on liner material .Light grey on the sides and...

Thanks Roy, I did wire brush things though,I did keep an eye on thing when I was grinding and if there were any noticeable cracks or poor welds I did clean and hit them again.

So I have been busy working on putting the exterior plywood on and preparing it for the exterior,I decided to go with a DIY spray on bedliner on the exterior ,so the pre has taken a bit longer,black on the underside and light grey on the roof and sides. I found a source for the pop-up material...

Yes I bought a cheaper spool gun and had to replace ,4 days before the warranty was up .I found that the gas and amp were more critical ,but I did a lot of grinding . I used both wires 5035 and 4043 ,I ran out of the 5035 and couldn't get any anywhere ,so I talked to my local welding shop and...

I used a non ferrous cutting blade on a Dewalt trim saw,cut good no issues ,used the same blade since I started . The tubing is 1.5 " square 1/8" thick

Some More

Here are more pics,making sure it fits .

So I started building my own pop up camper in October 2019. I thought of building one many years ago and the thought went by the wayside until I saw a camper on a back of a Toyota Tacoma in a general store it look awesome .in July 2019 . I approached the owner who was glad to show me his...

Ok thanks ,I'm going to set up a forum and post some pictures ,the ones I have ,I keep forgetting to take them at different stages .I'm thinking I may look at doing some type of hard folding sides ,I had got some budget pricing for vinyl and its not going to be cheap.

Greg I just started building my own pop up camper ,do you have any pictures of the top up? what material did you use for it