Anyone have any experience fitting an auxiliary transmission cooler to the diesel vans? Thinking about doing some towing with my 2.8 but don't want to burn up the tranny. I've seen derale has a barb fitting that works with the 4.3 and 6.0 gas vans but not sure if it will work for the lines on...
I've got a 3/4 ton so yeah probably still a stiffer spring than the 1500. It's definitely not the control arm bumpstops that are limiting. I think it's the shocks because the upper ball joints aren't at too high an angle. That's a good trick to try out. I'm thinking about swapping out stock...
Went ahead and jacked up the front end of my van yesterday. Only about 1"-1.5" of down travel from weight on wheels to lifted off ground. The droop stops are definitely not limiting the down travel so I'm thinking it's either the shocks or maybe upper ball joints? I'm just going to have a...
Funny I put similar 2" leveling spacers on the front of my van and I was thinking that's what is causing the harsher ride up front. I also put sumosprings bumpstops on the front too so maybe those are playing into it. I'm going to look into getting longer shocks. Anyone ever tried bump stop...
Ok question, what typically limits the droop of the front suspension on these vans? After adding 2” coil spacers it seems like the front wheels bottom out more easily over speedbumps etc. If the shocks are usually the limiting factor I’m thinking longer shocks or extenders might help. If it’s...
I had 2” coil spacers put on my 2018 gmc Savana extended cargo. No problem with alignment but it does seem like my front suspension travel is more limited now, especially noticeable over speed bumps. Just weighed the van fully loaded on cat scales, 7680 total, 3880 front/3800 rear. Wondering if...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.