Search results

  1. E.Roy

    2nd/3rd Gen Tacoma frame beaming/resonance?

    Yes, the Hammer hangers alone make a noticeable difference. On my Double cab with stock springs I was shocked at how much it improved the ride. The stock hangers are like bolting a leaf spring to another spring. The difference is most noticeable over harsh bumps that cause high speed...
  2. E.Roy

    2nd/3rd Gen Tacoma frame beaming/resonance?

    A huge issue is the flimsy stock hangers on 2005-2018 Tacomas. Archive Garage has addressed the issue with the Hammer hangers and the optional cross tube to tie the Hammer hangers, and by extension, the frame rails together. The system gives a big improvement in ride quality, the HH being the...
  3. E.Roy

    Pete's Tacoma Build

    Great pics, thanks for the update. So you had the Cooper ST's and now the ST Maxx, do they perform well enough in gnarly offroad situations? I have the 255/80-17 on my Tacoma
  4. E.Roy

    *Rickashay's 04' Tundra* - A build of Compromises

    I asked Jeff at Deaver for 1.5" lift with 500lbs in bed on Addison's springs, which should have basically been a beefed up G57, so I don't know why its so low, but we are working on figuring it out
  5. E.Roy

    seanpistol's 01 Tundra

    Very cool, nice acquisition Sean
  6. E.Roy

    *Rickashay's 04' Tundra* - A build of Compromises

    Thank you Addison for the review and testing this kit out with some hard kms. I am now taking orders for approximate August 1st ship date (not in stock yet) I do not yet offer shackles for 1st gen Tacomas but someone could twist my arm.
  7. E.Roy

    *Rickashay's 04' Tundra* - A build of Compromises

    Beautiful scenery, and I like your dad's Tacoma
  8. E.Roy

    *Rickashay's 04' Tundra* - A build of Compromises

    I don't recall exactly but I think it can swing 30 degrees forward, but it is actually a benefit of this design because the shackle cannot pop forward
  9. E.Roy

    *Rickashay's 04' Tundra* - A build of Compromises

    Its not on my mobile phone, but I did see it on my PC Nice video Addison!
  10. E.Roy

    *Rickashay's 04' Tundra* - A build of Compromises

    The storage platform looks great, so clean! Nice story as well, you got my vote.
  11. E.Roy

    Leaf Suspension Tech - Planning for my 04' Tundra

    Post#98^^ Mike, I think you are right with this info, but I think I can add a little. I would guess the stock springs are a high spring rate, with low arch, probably for load capacity to keep the sag/pound ratio low as it gets loaded. This compromises wheel travel, both up travel and droop...
  12. E.Roy

    Leaf Suspension Tech - Planning for my 04' Tundra

    Great, thank you. I know that the center to center distance from front hanger bolt hole to shackle hanger pivot hole is 59.5". Given that info, the stock shackle should lay pretty flat at droop.
  13. E.Roy

    Leaf Suspension Tech - Planning for my 04' Tundra

    You might be right that a shackle flip may not help much with the same length or stock shackle. I'm happy with being honest about the facts on this, I guess we can wait and see in a few weeks or so, Addison's kit is en route. Member Cam-shaft on his 2005 Tacoma stated he got better droop...
  14. E.Roy

    Leaf Suspension Tech - Planning for my 04' Tundra

    For anyone looking to replace the stock 00-06 Tundra leaf spring or shackle bushings, I discovered while doing some R&D, that the shackle bushings are the same EXACT physical dimensions of the leaf spring eye bushings, but far more expensive. I can't say whether the rubber is a different...
  15. E.Roy

    seanpistol's 01 Tundra

    Nice Tacoma, that will get you through serious terrain. I like that v6 engine, decent torque at 220 lb-ft, and I've read it truly is a non-interference engine and the timing belt is robust as it is. I just looked at a 1998 1st gen last week but the frame was toast, ended up buying a Jeep...
  16. E.Roy

    93 W250 cummins Ram project

    These trucks are a great platform, simple, tough, reliable and easy to work on. I think you should keep that truck together, drive it for however long it suits you and if/when you sell it, you'll have one of the lowest mileage examples and get a good buck for it.
  17. E.Roy

    *Rickashay's 04' Tundra* - A build of Compromises

    I just spent some time at a upullit yard measuring leaf springs and to my surprise, pretty much only GM had the center pins actually centered, the seemingly logical way. The short side on other trucks is towards front hangers, which I suppose would lessen axle wrap on acceleration, and aid...
  18. E.Roy

    Battleship Jones: 2015 Tacoma DCLB Build Thread

    Other Tacoma owners have found that same clunk noise in the same scenario of backing up or out of their driveway and tracked it down to loose leaf spring u-bolts. The Tacoma manual calls out a rediculously low 37 ft-lbs on these u bolts. I recommend you check those and tighten them to about 80...
  19. E.Roy

    2016 Chevrolet Colorado Diesel: First Drive 30+ MPG HWY says GM....

    The newer full size Dodges and Fords are very large, great for certain people and tasks, but not necessary for every person or use though. I know what Stang302 is saying, because with my crusty old Dodge, I thought the same thing. The only penalty for going big is the heavy feel of the...
Top