100 Series ARB Bull Bar measurements

[thecriscokid]

Can someone help me out with some measurements from there LC 100 Bull Bar?
I'm trying to figure out if I could modify one to fit my '00 Tundra. I know that the front profiles are a little different and there would need to be some trimming and maybe filling so what I'm looking for are:
Mounting dimensions, overall width, picture of mount
Many thanks.

 

[2000UZJ]

I have the 03+ combo bar, but essentially the same thing. I'll see if I can get measurements from the frame and width for you... might be a few days but I'll get some

 

[thecriscokid]

Great. That's the bumper I am trying to fit. nice cruiser btw

 

[jsnow]

I am planning on doing this myself. The 100 series bar mounting is about 2" narrower than the Tundra, so I am planning on fabbing the mounts. The only thing that has me worried is clearance for the grille. I just need to get my truck in the shop to do a quick test fit. I am running the Sahara bar now, but IMO a Tundra would look sweet with a bull bar. Let me know if you need more info, I have both bars sitting right outside.

 

[thecriscokid]

Perfect! are you doing the needed fab work? I see you are in CO. I may have to see it in person. I'm near Glenwood

 

[LJ_24]

I'm guessing that they dont make an ARB for the tundra/sequoia?

 

[jsnow]

They make a Sahara bar for the first gen, but no bull bar.

 

[hoser]

I happen to have these measurements from a previous request from another Expo member. This is the '03+ ARB Combination Bar.

 

[thecriscokid]

I happen to have these measurements from a previous request from another Expo member. This is the '03+ ARB Combination Bar.

Thanks, Very helpfull

 

[2000UZJ]

Hoser did a better job than I could of, best use the ones he provided. I can't provide that much info other than the bar width and frame rail width.

 

[andyt]

Hoser did the bull bar bolt right onto the LX ? I have a2006 LX Slee says i need to cut off the light tabs ?

 

[2000UZJ]

Hoser did the bull bar bolt right onto the LX ? I have a2006 LX Slee says i need to cut off the light tabs ?

you have to remove the upper ariel tabs on LX (any year, any combo bar model 98-02 or 03+).

 

[andyt]

I'm sorry for being a neophite but what does that mean ?

 

[andyt]

Am i modding the truck or the bumper ? either way it its simple I prefer this bar over the safari ARB bar

 

[2000UZJ]

Am i modding the truck or the bumper ? either way it its simple I prefer this bar over the safari ARB bar

you have to do 2 things on the LX.

LX-Cut the frame horns so they do not protrude past the actual frame. This will allow the ARB mounts to slide over the frame.

ARB Bumper- Cut the tabs off the upper bar work. Sand and repaint.