shade
Well-known member
If a battery can start my truck, I'm pretty sure it can start a small fridge compressor, especially if the low voltage protection hasn't been tripped.Yes,
Because it’s not squatters to relate to a 100ah battery as 100ah capable for static energy source for a fridge.
It will be insufficient for the spike needed to start the fridge’s compressor even when the volt is within cutoff values.
It’s not just the volt, but the current is more relevant.
That’s another issue why I’m trying to understand how you manage these great results from a standard battery.
In this case, it did start my truck, it did start the fridge compressor, and the fridge's low voltage protection had not been tripped - I set mine to the least aggressive setting. How many amps do you think it takes to overcome the startup spike of a compressor? I doubt that threshold is nearly as high as you believe, which is why I continue to say that not being able to run a fridge overnight indicates a problem. Another variable came to mind. To minimize voltage drop, my fridge is on a dedicated circuit of 10/2 wire, which was another advantage over other installations that rely on whatever OEM wiring is available.
I've also acknowledged that I abused the battery during the 2.5 day period in question. My truck starts easy, and it's possible there was only a few seconds worth of cranking power remaining at the end. Without data, I'll never know.
The main takeaway might be that there are ways to minimize power consumption by a fridge, and they can extend the endurance of any battery.
- Keep the fridge ventilated
- Utilize shade
- Install a useful cover - black ones may do more harm than good
- Put the fridge on a dedicated circuit of heavy gauge wire
- Keep the wiring as short as possible
- Minimize time that the door's open
- Make sure the battery is fully charged before a long period of use without charging
- Don't charge other devices off the battery
- Keep the fridge full
- Pre-cool the contents when possible
Last edited: