2012 Tacoma Access Cab 4x4 // SOLD // SOLD

sumnrfam

Active member
SOLD // SOLD // SOLD

We purchased the Tacoma in March of 2015 with 63,043 miles on it, and other than some 19” bling wheels, it was bone stock. The truck currently has 87,892 miles and has been meticulously built and maintained. This is a turnkey ready to go expedition rig.

The Tacoma has taken us on some amazing adventures, but we have decided to ‘Go Big’ and build a rig that we will be able to live out of ‘semi’ full time here in a couple of years. It is in excellent condition, has some trail scratches, no rust, and the interior is perfect. The tires have less than 300 miles on them.

CBI Custom rear swingout was built with 2 center modules,, one to carry additional full-size spare tire, one to carry additional receiver hitch used for bike racks. Bumper will come with both and will come with 2 Scepter fuel cans & straps

Custom Springpack from Oregon Auto Spring,, designed to give 2.5-3" lift with 950-1000# in the bed,, it was perfect with the Four Wheel Camper,, ready for your bedrack, drawer system, and rooftop tent,, or @GofastCamper, @ATOverland Summit or Habitat Topper ;-)

The Truck is equipped with the following:
  • Icon Extended Travel Front Coilovers with Remote Reservoir (IVD 58735) $1600
  • Icon Remote Reservoir Rear Shocks for 2.5”-3.5” Lift (56503R-EXT X2) $629
  • Icon Tubular UCA’s (IVD 58450) $600
  • Oregon Auto Spring Custom rear Leaf Pack $670
  • Rear U-Bolt Flip Kit with ‘Timbren’ SES bump stops $260
  • Front ‘Wheelers Off-road’ SuperBumps $50
  • Front and rear ‘Goodridge’ Extended brake lines $150
  • ARB ‘Safari Snorkel $465
  • ‘RhinoLiner’ Rocker panels and fender flares $450
  • 5- 17” TRD Pro SEMA wheels (installed in July 2019) $860
  • 5 – Falken Wildpeak 255/80r17 (installed July 2019, less than 300 miles on the tires) $900
  • CBI ‘Moab’ Front Bumper,(alum) $1200
  • CBI ‘Bushmaster’ High Clearance Rear Bumper with custom swingout for camper $1950
  • 2 – Fuel Cans Holders on swingout $160
  • 2 – ‘Scepter’ Fuel Cans $100
  • CBI Sliders $450
  • Pelfreybuilt Alu. Front/Mid skid plates $400
  • Switch Pro Lighting Control Panel in center console $400
  • BajaDesigns 4 x ‘XL PRO’s (Spots, Combos) $1240
  • Baja Designs 4 x Squadrons (Amber wides in bumper, combos on A Pillar) $420
  • Relentless Fab ‘Ditch Light’ brackets $35
  • TechDeck / Ram mount in dash $75
  • ‘Wade’ Wind Deflectors $70
  • ‘ImMrYo’ Rearview Mirror Riser Bracket $40
  • ‘Nitro Gear’ 4:88’s Front / Rear with Harrop Eaton Lockers (Activated via Switch Pro) $4900

SOLD // SOLD // SOLD with a full tank of gas
:cheers:

(y)

IMG_3162crop.JPG
 
Last edited:

cbadbox

Member
Great Build, I believe I saw this rig at the Expo West 2019, very clean, simple and practical interior build on the Fleet allows for roomy interior.

GLWS!
 

sumnrfam

Active member
pics of camper interior would be helpful,head lockers? thanks
Additional photos coming today, Camper does not have 'permanent' head, Reliance porta potti tucks into rear passenger corner under one of the cabinets. "Lockers" are you referring to Diff lockers?, or ? Front and rear Differential lockers are Harrop/Eaton Aussie made electronic locking differentials runnig via the 'SwitchPro' panel .

I will have additional interior photos up today, but take a look at the drive photo album as there are a lot of in progress build photos as well.

Thanks,

Wade
 
since this is just a six,how does this rig work in the mountains? gvw?
and what shape is the canvas and hydraulics in?
mpg with load? my tacoma stinks....
tia
 
Last edited:

Forum statistics

Threads
188,197
Messages
2,903,675
Members
229,665
Latest member
SANelson
Top