2018 Tacoma TRD Offroad 4X4 AT Overland Habitat Topper (36718+ miles) Turn-Key Overland Setup & 1/9 Scale RC Model

[tenebs]

Turn-Key Overlanding 4x4 Adventure
2018 Tacoma TRD OffRoad 4x4 with At Overland Habitat Topper
VERY LOW MILEAGE 36718 miles at time of this post!
PLUS Replica Tacoma & Habitat 1/9 Scale RC Model
$55,000
Tucson, Arizona
Tacoma VIN: 3TMCZ5ANXJM180550

Multiple Posts to Follow with All Details

Link to interactive PDF

Original Owner. Clean title in hand. Non-Smokers.
Very low mileage, only used for designated overlanding trips or weekly maintenance drive.
This is not my primary vehicle so while mileage will be added it will not be significant.

This is a southern Arizona truck. No accidents or damage (some minimal desert pinstripping and minor scrapes on underbody skid plates).
Meticulously maintained, primarily by myself. After a trip the vehicle gets immediately washed, vacuumed
and cleaned. I am a firm believer that mud & dirt should be removed ASAP after a trip to avoid abrasive damage to components.
The truck received all required service but we do it ourselves using OEM filters, OEM antifreeze, OEM transmission fluids, and Mobil 1 oils.
Depending on when the truck sales I should have several extra TRD Pro oil filters, air & cabin filters that will be provided. An oil filter tool is also part of the sale.

This is a go anywhere truck and overlanding setup and we have loved using it. I intended on keeping
this truck for a very long time as with our other vehicles. However, I have a large dog and will be adding
another so looking to eventually move into an SUV again so that with the two dogs in the backseat, we
still have space in the back for camera gear. We currently have two other overlanding vehicle setups
and small off-road trailer that currently suits our needs until I move to the next setup.

As I list out components below, I have included the original item price excluding labor & taxes to give
an idea of the value of this truck and given significant price increases, what it would takes to build a
similar new build. This truck is a great bargain for a turnkey off-road capable overlanding vehicle. I have
also listed components that I will include in the sale but are not currently installed, this will be in orange.
After I list an item, I also list below if if I have the original OEM component to be included. Removed
OEM components and other accessories included have been wrapped or boxed and stored inside out of
weather & sun.

SUSPENSION & DRIVETRAIN
2.5” King Suspension with Reservoirs
King Front 2.5” coilover with reservoir 25001-119A ($1828)
King Rear 2.5” with reservoir 25001-121A ($1211)
King Hydraulic Bumpstops on all 4 wheels
King Hydraulic Front Bumpstops 20AB001-103 ($780)
King Hydraulic Rear Bumpstops 20AB001-104 ($780)
Total Chaos Front UCAs Uniball 96504 ($742)
Deaver U402 Stage III Expedition Leaf Springs ($985)
Nitro 5.29 Front & Rear Differential Gear Package ($1699)
These are large hefty gears. See comparison to Jeep.
(Original factory gears included, 1785 miles)

WHEELS & TIRES
Black Rhino Chase Wheels, 17” (5 total: 4+spare) ($1160) Anthracite
Falken Wildpeak A/T3W LT255/80R17 121S E1 BSW
(5 total : 4+spare) Installed at xxx miles
Thread depth at time of this post: xx
Front SDHQ Body Mount Chop Welded on Plates ($35)

PROTECTION & ARMOR
Expedition One Bumpers:
Front Bumper, Wrap Around Bullbar ($2260)
Baja Designs Pro/Driving Combo Lights amber covers, wired to stock fog light)
Dual Swing Rear Bumper ($2490)
Baja Designs Squadron Sport Backup/Flood lights (Interior switched)
Rear tire mount for swingout (never used) ($100)
Mobtown Offroad Bolt-On Rock Sliders, 20°kickout, filler plates ($849).
These are true slides that will support the truck.
They are rattle can painted (for easy touchups) with Rustoleum Pro.
A hi-lift (not included) on the sliders can lift both wheels off the ground.
RCI Skid Plates Full Skid Package
(Engine, Transmission, Transfer case & crossmember) ¼” Raw Aluminum ($890)
RCI Fuel Tank Skid Plate, 3/16” Raw Aluminum ($270)
RCI A-arm skids, ¼” Raw Aluminum ($165)

RECOVERY GEAR
Winch:
ComeUp Seal Gen2 9.5RS, Synthetic Rope
wired and wireless remote ($996)
Anderson SB50 connects (only plug in winch when needed)
Factor 55 Ultrahook ($238)
Factor 55 Hawse Fairlead 1.0 ($63)
Factor 55 Basic Guide to Winching ($5)
MaxTrax mounts on side of habitat (holds 4 maxtrax) ($45)
(I will be keeping the 4 blue Maxtrax as we swap them between our vehicles)
Front & Rear bumpers have heavy duty dual shackle mounts
4 blue steel shackles
On Board Air:
ARB Twin Dual Air Compressor
ARB Airhose & Gauge Included
Expedition Essentials bedside compartment mount ($540)
Expedition Essential ARB Twin Compressor wiring harness ($102)
Exterior ARB Quick Connnect/Disconnect port on Habitat Drivers Side.

PERFORMANCE TUNING
Orange Virus Tuning (VF Tune) Package ($699) - original version but can be upgraded by VF Tune
Hypertech 730123 Speedometer Calibrator ($140)

EXTERIOR MODS
ARB Safari Snorkel Intake Kit ($526)
Raises intake above dusty wheel well
Keeps air filter significantly cleaner
Sy-Klone International Series 9001 Precleaner ($190) (AEV40306108AA)
Spins particulate debris out before it gets to airfilter
Bullet Proof Fabricating Metal Grill ($385)
Retains full functionality of front collision sensor
Well-Visor Window Vents ($89)
AT Overland NATO Gas Can Mount ($150)
Wavian NATO Steel Gas Can ($76)
Redline Tuning 21-27015-02 Hood QuickLift Plus gas struts ($100)
Manual rod hood support holder still installed
Meso Customs Gashole gas cap holder ($20)
Meso Customs headlight trim plates ($45) (original uninstalled OEM included)
RokBlokz Rear Mudflaps ($75)
AC Drain tube to avoid drippping on frame
Rear Diff Breather Hose - Have components but they are not installed

ROOF MODS
Eezi-Awn custom sized K9 Roof Rack ($850)
Two Zarges K470 - 40849 ($353 ea = $706)
RhinoRack Folding Antenna Mount ($96)
Colorado Fairing Custom Fairing ($215) (Extra Fairing included that can be rewrapped or painted.)
Eezi-Awn K9 Roof Rack Accessory Adapter Plate Set ($30) 1 installed , 1 extra
MVT Offroad Tacoma Sharkfin XM Antenna delete kit ($25)
Included but not installed, was planning to install so I can add a table slide under the habitat topper overhang.

ELECTRICAL
Off-Grid Engineering Dual Battery Mount System
w/ Blue Sea ML-ACR Switch & interior switch ($864)
All accessories wired from 2nd battery switched fuse box
Blue Sea Main power disconnect (Disconnects aftermarket accessories from power.
2 Blue Sea fuse boxes (underhood and in truck bed).
Cali Raised OEM style Switch panel, Driver left panel ($15)
Anytime Backup Camera Kit & front Camera ($150)
Center console dash switch to view either front camera or rear backup camera anytime even when driving, perfect for seeing obstructions when off road.
WeBoost Drive 4G-X OTR ($538)
Center ceiling console switch to power weboost
RFI LTE 38” 6.5 dBi 698-2700 MHz TS210701 ($250)
Exterior Cellular Antenna for WeBoost or any cellular booster (original weboost antenna included)
Rear View Safety Rear Camera & Rearview mirror replacement (original rearview mirror included)
Incandescent interior lighting replaced with LEDs
Added Ports:
Center Console – Dual USB QC 3.0
Glove Box – Dual USB QC 3.0
Center console dash – Dual USB QC 3.0
Passenger Side Backseat rear side – 12VDC female socket
Truck Bed Added Ports:
3 QC 3.0 USB Ports & 2nd Battery Voltage Display
12V DC Female Socket
Power Tray (uninstalled but included) ($90)

 

[tenebs]

SOLAR
Hood solar panel: SOLARA M-Series S320P41($898)
80W, 12V, Voc 25.87V, Isc 3.84
This is a high-quality German semi-flexible solar panel with a heat dissipating Aluminum backing panel.
This panel is designed for sailboat decks and being walked on.
Keeps the 2nd battery charged & fridge going when vehicle is parked but not deploying additional portable solar panel.
Hood Solar Controller:
Victron Smart Solar MPPT 75V 10A Bluetooth ($105)
Portable Solar Controller:
Victron Smart Solar MPPT 75V 15A Bluetooth ($120)
SAE Exterior port for portable solar panel ($20)

EXTERIOR LIGHTING AVAILABLE
Ditch Lights:
Cali Raised Ditch Light Brackets
Cali Raised low profile ditch lights ($145)
Fit rigid lens covers, black & amber covers included.
Lights currently not installed but included
CH4x4 Ditch Light Switch (installed but currently not connected)
Exterior Habitat Camper Lighting: removed but included for reinstall
2 Rigid 1x2 white LED scene light ($100ea = $200) (was one each on drivers & passenger side)
Rigid 1x2 amber LED LED scene light ($100) (was on passenger side)
Rigid A Series Amber ($74) (was on underside of topper when deployed)

TRUCK BED MODS
Fridge:
National Luna 90L Twin Dual Zone Fridge/Freezer
Danfoss Compressor ($2535.00)
Custom Control panel cover
National Luna fridge Anderson Plug Cable ($60)
Tembo Tusk Fridge Slide with cutting board ($750)
Currently has blue cutting board.
(will also include unused original white cutting board)
Tembo Tusk Fridge Slide Docking Station ($95)
Allows easy removal of fridge while keep main mount to vehicle in place.
Tembo Tusk Buffalo Straps ($49)
Custom cargo barrier rear of fridge slide
Keeps gear from falling into space when fridge out
Electrical:
Pop & Lock Power Tailgate Lock ($85)
Blue Sea Systems Fuse Box in enclosed box
NOCO GCP1 12A 125V Exterior AC Port Plug (provides easy Fridge plug in shore power) ($14)
Bed mounted Anderson SB50 port for fridge DC power ($15)
4x4SPOD Universal 8-circuit Source SE ($750)
Touchscreen & Bluetooth module ($135)
(This is currently uninstalled but will be included.
Can mount to bed rail next to Fridge. Mouting bracket provided.)
Other:
At The Helm Bedside Reinforcement Stiffeners ($125)
Bedrug Classic Full Bed Liner ($360)
Added OEM forward bed Rail to bed ($100)
Bed Rail Eye Bolt Mounts

INTERIOR MODS
Goose Gear Backseat Delete 40% & 60% ($625 & $675)
(original never used OEM backseats & behind seat paneling included)
Backseat Interior metal body covered with sound barrier prior to install of system
Highest Quality Window Tinting: All legal tint
Sunroof – Formula One Pinnacle 5% ($150)
Windshield – 3M Crystaline Clear 70% ($350)
Windshield Upper Strip – Formula One Comfort 5% ($35)
Rear Doors – Formula One Pinnacle 35% ($200)
Front Doors tinted by dealer by the Specialists (same reputable dealer that installed my tint)
OG Fabrications Center Console Molle Board (pair) ($95)
Tactical Water Bottle holder on each side
Small pouch on driver side
Glove dispenser on passenger side
OG Fabrications Front Door Molle Panel (pair) ($95)
Four tactical pouches, 2 on each door
OG Fabrications Custom Molle panel for rear drivers side backseat delete ($125)
Raingler Rear Ceiling Net ($178)
Taco Garage Dashtop Multi Mount (DMM) with RAM ball mounts ($70)
Center Ram phone mount arm
Hondo Garage metal radio knobs (Original uninstalled OEM knobs included)
Hondo Garage Un-Holey Dash mount, Air Vent RAM mount ($104)
(1 installed drivers side for GPS, unused extra included)
Original Dashmat ($43)
Meso Customs Coin Tray box with flip lid ($35)
Wet Oklole Hawaii Front Seat Covers ($314) (Original seats have always been covered since day 1)
Custom LOXX Fastner Panel to protect back driver’s side door from dog
(easy to make custom replacement panel)
Welded back seat barrier to separate gear from dog (removable).
Champ 12V fan mounted to backseat barrier to provide air to dog.
Power switch controlled. Switch located on ceiling center console.
Power to fan at rear has a quick disconnect so another 12VDC device could be added instead.
WeatherTech Windshield Reflective Sunshield ($56)

 

[tenebs]

AT OVERLAND HABITAT TOPPER
SN: 18SO-1183

All Aluminum construction, Coated with Sharkhide by AT Overland. Topper can be vinyl wrapped.
I added a lasered SN plate above the AT Overland Badging. The SN per AT is the original sale order number.

Standard Features:
Base unit ($8900, currently base unit price is $13,900 new)
Truck Bed Standing Height 7’8”
Weight 340 lbs
Insulated carpeted interior walls
Ceiling gear loft not currently installed but included
4 Interior side pockets
Designed to handle rugged off-road 4x4 travel
Cantilevered bed creates an instant awning.
Open weight bed rating 600 lbs.
Cantilevered bed, sleeps two.
87” x 48”x2” Mattress included (std queen size sheets will cover mattress)
Full platform can be added to sleep more.
Waterproof cotton poly tent, fire retardant
Suggested yearly “seasoning” by hosing tent down.
Expands fibers to maintain waterproofness (like the old school cabin tents)
Easy deployment & closure by one person (including custom closing aid)
Superior ventilation and air cross flow
Roof can be walked on when closed
Locking hatch
Built in wiring raceways

Included Options:
Cab side slider window ($360)
Rear liftgate window, 14”x30” ($290)
Right side Tern Overland locking hatc, 17.7”x43” ($550)
(Carpeted for attaching Velcro patches or Velcro pouches. Some pouches included.
Aircraft L Track on roof
3 roof rack rails, position adjustable of L track
Goose Gear double fold away interior seat. ($500)
Nemo Awning attachment kedder rails on three sides of habitat.
Nemo Awning included.
Drivers side mounted brackets for shower enclosure mount.

Added Habitat Extras:
Dragonfly Tarps Habitat Enclosure ($1200)
Enclosure customizes to enclose ends and added protection to avoid rubbing damage for gear on dual bumper swingouts
AluCab Shower Cube mounted to Drivers Side ($600)
Custom domed rainfly for shower cube
Custom maple butcher block platform
Custom tail gate side panels to block sun or light drizzle when a full habitat enclosure is not needed or wanted.
Loxx Fastner Privacy Curtain
Two dual USB ports on passenger side upright
Ram Mount drivers side upright
12VDC female plug drivers side upright
Full bed rug (listed previously)
Drivers side MaxTrax mounts (listed previously)
Custom homemade winter Liner for bed area

Info on AT Habitat can be found at https://atoverland.com/pages/at-habitat-truck-topper

 

[tenebs]

ADDITIONAL CAMPING GEAR INCLUDED
Propane:
Two Power Tank Propane Mounts ($120 ea = $240)
Two Manchester 5lb Propane Tanks ($80 ea = $160)
Aluminess Expedtion Kit shovel, axe & mount ($225)
Custom 22oz heavy duty Vinyl Exterior Trash Bag ($170)
Dragon Fly Tarps Custom Pendragon 18’x25’ Tarp Morrocan blue HyperD 300 ($1060)
Customized to attach to truck & Habitat Topper using installed footman’s loops on either side.
This DOES NOT include the poles, as I have two of these tarps for different vehicles that share the poles.
Requires four poles ($240 from dragon fly traps, these are 2” dia poles), other large study poles will work.
When installed with properly angled poles this tarp withstands high winds, much better than previous awnings I have owned.
Large footprint provides ample shade from the sun or protection from rain.
Straps are included.
Original US Mil Spec Stakes included.
Tarp can also be setup standalone.

1:9 SCALE RC REPLICA MODEL

The custom 1/9 scale functional RC model of the truck is included.
The body & chasis of the model is from MFAB 4x4 and was assembled sanded, primed and painted.
The body panels are PLA, some accessories are SLA, and accessories I 3D printed myself are resin.
Due to the materials this model is meant to be a shelf queen and only used for demonstration or photo/video shoots.
It is not meant for aggressive RC model use.

This is a continuous work in progress and it still needs some final details completed. I will provide the accessories and components that I currently have for the model. For instance I have the side hatch window & hinges for it but it is not permanently attached. I have the led lighting & wiring so the lights will be functional . They just need to installed & wire management & plugged into the onboard controller. There is a remote that will control 4 channels. So you can add a functioning winch on one channel, lights on another, and have additional channels available. I have brass tubing that I was going to use to replace the front bumper SLA tubing for more durability.
I will provide the 3D files for the accessories I have created or that I obtained from MFAB. I do not have a full 3D file for the complete model as that is a product sold by MFAB 4x4.

The video provides an overview of the RC model. The interactive pdf has the videos embedded.
Video overview of RC model:

Video of RC Model Habitat opening up.

UNINSTALLED ITEMS INCLUDED
Items in orange in previous categories above are included but not installed.
Protection:
Expedition One tire carrier for rear bumper
Suspension & Drivetrain:
Original factory gears
Exterior:
Original headlight trim plates
Hose to create rear differential breather to rear taillight
Roof:
Extra Colorado Fairing panel
MVT Offroad Tacoma sharkfin delete plate
1 Ez-Awn K-9 roof rack accessories adapter plate
Electrical:
Original Weboost antenna
Original rearview mirror
Powertray
4x4SPOD Universal 8 circuit Source SE, touchscreen & bluetooth adapter
Exterior Lighting:
2 Rigid 1x2 white scene lights for habitat sides
1Rigid 1x2 amber scene light for habitat side
1 Rigid A Series amber light for habitat downloght when topper open
Cali Raised low profile ditch lights (2)
Rigid black out & amber covers for ditch lights
Interior:
Original Backseats 60/40
Original Panel & speaker behind back seat
Habitat:
Original white unused & factory wrapped cutting board for fridge slide cutting board pulllout
Misc:
Hondo Garge unholey mount for front airvent

OTHER MISC ITEMS
There may be some other items that get added that I forgot to include here.

 

[tenebs]

Original pictures in images above from above that are too large to post here separately and additional not included in the above pictures are located here:

Google Drive Picture Location Link

 

[shellb]

Great ad, love when folks take the opportunity to provide all the information for potential buyers in a well thought out and organized fashion!